問題

install安裝程序

提示/usr/下空間不夠

复制Unpacking cpp-13 (13.1.0-8) ...

dpkg: error processing archive /var/cache/apt/archives/cpp-13_13.1.0-8_riscv64.deb (--unpack):

cannot copy extracted data for './usr/libexec/gcc/riscv64-linux-gnu/13/cc1' to '/usr/libexec/gcc/riscv64-linux-gnu/13/cc1.dpkg-new': failed to write (No space left on device)

Preparing to unpack .../gcc-13_13.1.0-8_riscv64.deb ...

Unpacking gcc-13 (13.1.0-8) ...

dpkg: error processing archive /var/cache/apt/archives/gcc-13_13.1.0-8_riscv64.deb (--unpack):

cannot copy extracted data for './usr/libexec/gcc/riscv64-linux-gnu/13/lto1' to '/usr/libexec/gcc/riscv64-linux-gnu/13/lto1.dpkg-new': failed to write (No space left on device)

Errors were encountered while processing:

/var/cache/apt/archives/cpp-13_13.1.0-8_riscv64.deb

/var/cache/apt/archives/gcc-13_13.1.0-8_riscv64.deb

E: Sub-process /usr/bin/dpkg returned an error code (1)

查看分區

复制*df -h*

查看/目錄使用了96%

复制root@starfive:~# df -h

Filesystem      Size  Used Avail Use% Mounted on

udev            1.7G  117M  1.6G   7% /dev

tmpfs           390M  3.2M  387M   1% /run

**/dev/mmcblk1p4  2.5G  2.3G  123M  96% /**

tmpfs           2.0G     0  2.0G   0% /dev/shm

tmpfs           5.0M   12K  5.0M   1% /run/lock

tmpfs           390M   60K  390M   1% /run/user/110

tmpfs           390M   20K  390M   1% /run/user/0

root@starfive:~#

查看存儲

复制*fdisk -l*

有28.85G，/即**/dev/mmcblk1p4 **只使用了2.5G左右

复制root@starfive:~# fdisk -l

Disk /dev/mtdblock0: 256 KiB, 262144 bytes, 512 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mtdblock1: 3 MiB, 3145728 bytes, 6144 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mtdblock2: 1 MiB, 1048576 bytes, 2048 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

GPT PMBR size mismatch (5529599 != 60506111) will be corrected by write.

**Disk /dev/mmcblk1: 28.85 GiB, 30979129344 bytes, 60506112 sectors**

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: gpt

Disk identifier: E05DB137-41F7-47A6-B1C1-E9BE91A4BC0E

Device          Start     End Sectors  Size Type

/dev/mmcblk1p1   4096    8191    4096    2M HiFive BBL

/dev/mmcblk1p2   8192   16383    8192    4M HiFive FSBL

/dev/mmcblk1p3  16384  221183  204800  100M EFI System

/dev/mmcblk1p4 221184 5527518 5306335  2.5G Linux filesystem

root@starfive:~#

創建分區

原來是刪除原來的/目錄的分區，然后重新創建分區，注意刪除/所在的分區時先不要w保存，最后創建新的分區再保存。

复制*fdisk mmcbllk1*

复制root@starfive:~# fdisk mmcbllk1

Welcome to fdisk (util-linux 2.38.1).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

fdisk: cannot open mmcbllk1: No such file or directory

root@starfive:~# fdisk /dev/mmcblk1

Welcome to fdisk (util-linux 2.38.1).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

This disk is currently in use - repartitioning is probably a bad idea.

It's recommended to umount all file systems, and swapoff all swap

partitions on this disk.

复制*輸入p查看*

复制Command (m for help): p

Disk /dev/mmcblk1: 28.85 GiB, 30979129344 bytes, 60506112 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: gpt

Disk identifier: E05DB137-41F7-47A6-B1C1-E9BE91A4BC0E

Device           Start      End  Sectors  Size Type

/dev/mmcblk1p1    4096     8191     4096    2M HiFive BBL

/dev/mmcblk1p2    8192    16383     8192    4M HiFive FSBL

/dev/mmcblk1p3   16384   221183   204800  100M EFI System

/dev/mmcblk1p4  221184  5527518  5306335  2.5G Linux filesystem

复制*輸入d，然后輸入4刪除分區4*

复制Command (m for help): d

Partition number (1-4, default 4): 4

Partition 4 has been deleted.

复制*輸入n然后輸入4重新創建分區4，后面都直接回車按照默認參數*

复制Command (m for help): n

Partition number (4-128, default 4): 4

First sector (34-60506078, default 221184):

Last sector, +/-sectors or +/-size{K,M,G,T,P} (221184-60506078, default 60504063):

Created a new partition 4 of type 'Linux filesystem' and of size 28.7 GiB.

Partition #4 contains a ext4 signature.

复制*如下提示輸入y*

复制Do you want to remove the signature? [Y]es/[N]o: y

The signature will be removed by a write command.

复制*輸入w寫入分區*

复制Command (m for help): w

The partition table has been altered.

Syncing disks.

复制*通知內核同步**partprobe /dev/mmcblk1*

复制root@starfive:~# partprobe /dev/mmcblk1

复制*再次查看分區lsblk，可以看到根目錄/增加到了28.7G*

复制root@starfive:~# lsblk

NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS

mtdblock0    31:0    0  256K  0 disk

mtdblock1    31:1    0    3M  0 disk

mtdblock2    31:2    0    1M  0 disk

mmcblk1     179:0    0 28.9G  0 disk

├─mmcblk1p1 179:1    0    2M  0 part

├─mmcblk1p2 179:2    0    4M  0 part

├─mmcblk1p3 179:3    0  100M  0 part

└─mmcblk1p4 179:4    0 28.7G  0 part /

复制*擴容** resize2fs /dev/mmcblk1p4*

复制root@starfive:~# resize2fs /dev/mmcblk1p4

`resize2fs 1.46.6-rc1 (12-Sep-202[ 1019.864399] EXT4-fs (mmcblk1p4): resizing filesystem from 663291 to 7535360 blocks`

2) 

Filesystem at /dev/mmcblk1p4 is mounted on /; on-line resizing required

old_desc_blocks = 1, new_desc_blocks = 4

[ 1020.838282] EXT4-fs (mmcblk1p4): resized filesystem to 7535360

The filesystem on /dev/mmcblk1p4 is now 7535360 (4k) blocks long.

總結

通過闡述分區在重新創建分區，最后resize2fs擴展文件系統大小。

擴容后此時根目錄就夠用了，可以愉快的install程序了。

審核編輯：湯梓紅