--- 產品詳情 ---
Architecture | Voltage FB |
Number of channels (#) | 1 |
Total supply voltage (Min) (+5V=5, +/-5V=10) | 5 |
Total supply voltage (Max) (+5V=5, +/-5V=10) | 30 |
GBW (Typ) (MHz) | 270 |
BW @ Acl (MHz) | 270 |
Acl, min spec gain (V/V) | 1 |
Slew rate (Typ) (V/us) | 400 |
Vn at flatband (Typ) (nV/rtHz) | 12.5 |
Vn at 1 kHz (Typ) (nV/rtHz) | 12.5 |
Iq per channel (Typ) (mA) | 7.8 |
Vos (offset voltage @ 25 C) (Max) (mV) | 8 |
Rail-to-rail | No |
Rating | Catalog |
Operating temperature range (C) | -40 to 85, 0 to 70 |
CMRR (Typ) (dB) | 100 |
Input bias current (Max) (pA) | 5000000 |
Offset drift (Typ) (uV/C) | 0 |
Output current (Typ) (mA) | 100 |
2nd harmonic (dBc) | 65 |
3rd harmonic (dBc) | 62 |
Frequency of harmonic distortion measurement (MHz) | 5 |
- Very High Speed
- 270 MHz Bandwidth (Gain = 1, -3 dB)
- 400 V/usec Slew Rate
- 40-ns Settling Time (0.1%)
- High Output Drive, IO = 100 mA
- Excellent Video Performance
- 60 MHz Bandwidth (0.1 dB, G = 1)
- 0.04% Differential Gain
- 0.15° Differential Phase
- Very Low Distortion
- THD = -72 dBc at f = 1 MHz
- Wide Range of Power Supplies
VCC = ± 2.5 V to ± 15 V,
ICC = 7.5 mA - Evaluation Module Available
The THS4001 is a very high-performance, voltage-feedback operational amplifier especially suited for a wide range of video applications. The device is specified to operate over a wide range of supply voltages from ± 15 V to ± 2.5 V. With a bandwidth of 270 MHz, a slew rate of over 400V/us, and settling times of less than 30 ns, the THS4001 offers the unique combination of high performance in an easy to use voltage feedback configuration over a wide range of power supply voltages.
The THS4001 is stable at all gains for both inverting and noninverting configurations. It has a high output drive capability of 100 mA and draws
only 7.5 mA of quiescent current. Excellent professional video results can be obtained with the differential gain/phase performance of 0.04%/0.15° and 0.1 dB gain flatness to 60 MHz. For applications requiring low distortion, the THS4001 is ideally suited with total harmonic distortion of -72 dBc at f = 1 MHz.
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
-
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34