資料介紹
Introduction
The systems part of this Recommendation | International Standard addresses the combining of one or more elementary
streams of video and audio, as well as other data, into single or multiple streams which are suitable for storage or
transmission. Systems coding follows the syntactical and semantic rules imposed by this Specification and provides
information to enable synchronized decoding of decoder buffers over a wide range of retrieval or receipt conditions.
System coding shall be specified in two forms: the Transport Stream and the Program Stream. Each is optimized for a
different set of applications. Both the Transport Stream and Program Stream defined in this Recommendation |
International Standard provide coding syntax which is necessary and sufficient to synchronize the decoding and
presentation of the video and audio information, while ensuring that data buffers in the decoders do not overflow or
underflow. Information is coded in the syntax using time stamps concerning the decoding and presentation of coded
audio and visual data and time stamps concerning the delivery of the data stream itself. Both stream definitions are
packet-oriented multiplexes.
The basic multiplexing approach for single video and audio elementary streams is illustrated in Figure Intro. 1. The
video and audio data is encoded as described in ITU-T Rec. H.262 | ISO/IEC 13818-2 and ISO/IEC 13818-3. The
resulting compressed elementary streams are packetized to produce PES packets. Information needed to use PES
packets independently of either Transport Streams or Program Streams may be added when PES packets are formed.
This information is not needed and need not be added when PES packets are further combined with system level
information to form Transport Streams or Program Streams. This systems standard covers those processes to the right
of the vertical dashed line.
The systems part of this Recommendation | International Standard addresses the combining of one or more elementary
streams of video and audio, as well as other data, into single or multiple streams which are suitable for storage or
transmission. Systems coding follows the syntactical and semantic rules imposed by this Specification and provides
information to enable synchronized decoding of decoder buffers over a wide range of retrieval or receipt conditions.
System coding shall be specified in two forms: the Transport Stream and the Program Stream. Each is optimized for a
different set of applications. Both the Transport Stream and Program Stream defined in this Recommendation |
International Standard provide coding syntax which is necessary and sufficient to synchronize the decoding and
presentation of the video and audio information, while ensuring that data buffers in the decoders do not overflow or
underflow. Information is coded in the syntax using time stamps concerning the decoding and presentation of coded
audio and visual data and time stamps concerning the delivery of the data stream itself. Both stream definitions are
packet-oriented multiplexes.
The basic multiplexing approach for single video and audio elementary streams is illustrated in Figure Intro. 1. The
video and audio data is encoded as described in ITU-T Rec. H.262 | ISO/IEC 13818-2 and ISO/IEC 13818-3. The
resulting compressed elementary streams are packetized to produce PES packets. Information needed to use PES
packets independently of either Transport Streams or Program Streams may be added when PES packets are formed.
This information is not needed and need not be added when PES packets are further combined with system level
information to form Transport Streams or Program Streams. This systems standard covers those processes to the right
of the vertical dashed line.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- ISO/IEC_FDIS_14443-3:2000(E) 15次下載
- iso13818-123中文 0次下載
- MPEG DVB 海報
- MPEG ATSC 海報
- ISO-IEC 14882:1998(E)
- ISO/IEC JTC 1 N8281
- iso/iec 13818-1:2007 pdf
- iso/iec 13818-2:2000
- ISO/IEC 13818-7:2003(E) pdf
- ISO/IEC 13818-4:1998(E) pdf
- ISO/IEC 13818-3:1998(E) pdf
- ISO/IEC 14496-14:2003(E) pdf
- ISO/IEC 13818-7:2006(E) pdf
- iso/iec 14496-10 pdf
- ISO IEC 13818-2標準中文版 0次下載
- 什么是汽車ISO 26262功能安全標準? 3321次閱讀
- 與小數T1和E1接口 1300次閱讀
- T1和E1之間的轉換 1667次閱讀
- 采用slemens從站協議芯片實現PROFIBUS—DP現場總線的軟硬件設計 2263次閱讀
- AS3992與R2000對比 詳解AS3992與R2000性能差異 1.1w次閱讀
- 基于R2000芯片的讀寫器架構分析 淺談R2000芯片之架構 1.7w次閱讀
- 通用功能安全標準IEC 61508-3中的重要指南 6575次閱讀
- MLX90132收發器,主要應用于汽車NFC-RFID無線接入控制 3315次閱讀
- ISO/IEC RF?ID應用技術標準概述 4092次閱讀
- 解讀IEC60529 防護等級標準的實際應用 1.2w次閱讀
- ISO102,ISO106型管腳圖 3105次閱讀
- ISO102,ISO106型電路原理圖 3525次閱讀
- ISO120,ISO121管腳圖 3217次閱讀
- ISO120,ISO121功能塊圖 3304次閱讀
- ISO120,ISO121電路原理圖 4322次閱讀
下載排行
本周
- 1PC1013三合一快充數據線充電芯片介紹
- 1.03 MB | 5次下載 | 免費
- 2基于c51的時鐘設計
- 0.56 MB | 3次下載 | 免費
- 3智能門鎖原理圖
- 0.39 MB | 3次下載 | 免費
- 4CC256x TI藍牙協議?;A(chǔ)HFGAGDemo應用
- 1006.09KB | 2次下載 | 免費
- 5通過C51單片機控制數碼管顯示
- 0.56 MB | 2次下載 | 免費
- 62024PMIC市場洞察
- 2.23 MB | 2次下載 | 免費
- 7ADS8332EVMV2-PDK評估模塊
- 1.98MB | 1次下載 | 免費
- 8ADI高性能電源管理解決方案
- 2.43 MB | 1次下載 | 免費
本月
- 1XL4015+LM358恒壓恒流電路圖
- 0.38 MB | 146次下載 | 1 積分
- 2新概念模擬電路第四冊信號處理電路電子書免費下載
- 10.69 MB | 65次下載 | 免費
- 3PCB布線和布局電路設計規則
- 0.40 MB | 23次下載 | 免費
- 4GB/T4706.1-2024 家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 11次下載 | 1 積分
- 5JESD79-5C_v1.30-2024 內存技術規范
- 2.71 MB | 10次下載 | 免費
- 6elmo直線電機驅動調試細則
- 4.76 MB | 9次下載 | 6 積分
- 7串口工具UartAssist5.0.exe
- 0.60 MB | 8次下載 | 免費
- 8使用CR6850C設計并制作12V5A開關電源
- 1.53 MB | 6次下載 | 2 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935115次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183330次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73806次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多