資料介紹
The 87LPC76X Microcontroller combines in a small package the
benefits of a high-performance microcontroller with on-board
hardware supporting the Inter-Integrated Circuit (I2C) bus interface.
The 87LPC76X can be programmed both as an I2C bus master, a
slave, or both. An overview of the I2C bus and description of the bus
support hardware in the 87LPC76X microcontrollers appears in
application note AN464, Using the 87LPC76X Microcontroller as an
I2C Bus Master. That application note includes a programming
example, demonstrating a bus-master code. Here we show an
example of programming the microcontroller as an I2C slave.
The code listing demonstrates communications routines for the
87LPC76X as a slave on the I2C bus. It compliments the program in
AN464 which demonstrates the 87LPC76X as an I2C bus master.
One may demonstrate two 87LPC76X devices communicating with
each other on the I2C bus, using the AN464 code in one, and the
program presented here in the other. The examples presented here
and in AN464 allow the 87LPC76X to be either a master or a slave,
but not both. Switching between master and slave roles in a
multimaster environment is described in application note AN435.
The software for a slave on the bus is relatively simple, as the
processor plays a relatively passive role. It does not initiate bus
transfers on its own, but responds to a master initiating the
communications. This is true whether the slave receives or transmits
data—transmission takes place only as a response to a bus
master’s request. The slave does not have to worry about arbitration
or about devices which do not acknowledge their address. As the
slave is not supposed to take control of the bus, we do not demand
it to resolve bus exceptions or “hangups”. If the bus becomes
inactive the processor simply withdraws, not interfering with the
master (or masters) on the bus which should (hopefully) try to
resolve the situation.
benefits of a high-performance microcontroller with on-board
hardware supporting the Inter-Integrated Circuit (I2C) bus interface.
The 87LPC76X can be programmed both as an I2C bus master, a
slave, or both. An overview of the I2C bus and description of the bus
support hardware in the 87LPC76X microcontrollers appears in
application note AN464, Using the 87LPC76X Microcontroller as an
I2C Bus Master. That application note includes a programming
example, demonstrating a bus-master code. Here we show an
example of programming the microcontroller as an I2C slave.
The code listing demonstrates communications routines for the
87LPC76X as a slave on the I2C bus. It compliments the program in
AN464 which demonstrates the 87LPC76X as an I2C bus master.
One may demonstrate two 87LPC76X devices communicating with
each other on the I2C bus, using the AN464 code in one, and the
program presented here in the other. The examples presented here
and in AN464 allow the 87LPC76X to be either a master or a slave,
but not both. Switching between master and slave roles in a
multimaster environment is described in application note AN435.
The software for a slave on the bus is relatively simple, as the
processor plays a relatively passive role. It does not initiate bus
transfers on its own, but responds to a master initiating the
communications. This is true whether the slave receives or transmits
data—transmission takes place only as a response to a bus
master’s request. The slave does not have to worry about arbitration
or about devices which do not acknowledge their address. As the
slave is not supposed to take control of the bus, we do not demand
it to resolve bus exceptions or “hangups”. If the bus becomes
inactive the processor simply withdraws, not interfering with the
master (or masters) on the bus which should (hopefully) try to
resolve the situation.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- Gowin I2C Master/Slave用戶指南
- 硬件I2C與模擬I2C
- STM32F103硬件I2C Slave
- 嵌入式linux應用讀寫i2c示例
- 兼容opencores.org的I2C slave的RTL代碼 6次下載
- i2c 35次下載
- I2C總線控制的微處理器TMP87CK38N引腳功能 11次下載
- 基于Verilog的I2C控制器的設計與綜合 60次下載
- I2C Guid I2C指南
- I2C總線規范與I2C器件C51讀寫程序
- 基于I2C總線的鍵盤顯示模塊設計
- i2c總線的特點
- 用87LPC76X微控制器做為IIC總線主器件
- 87LPC76X的IIC從程序
- i2c總線ppt(I2C總線器件應用) 0次下載
- I2C地址跳變問題的調試案例 1115次閱讀
- MSPM0L1306開發板教程之I2C 3566次閱讀
- I2C通信協議及其工作原理 4475次閱讀
- Linux I2C驅動入門知識科普 1515次閱讀
- I2C通信的詳細講解 13.4w次閱讀
- 什么是I2C通信協議? 7569次閱讀
- i2c總線用來做什么_i2c總線數據傳輸過程 7086次閱讀
- fireflyAIO-3288C主板I2C簡介 1256次閱讀
- 基于MCS-51單片機I2C總線接口電路的設計 3245次閱讀
- I2C總線的工作原理解析 6413次閱讀
- 80C51單片機模擬I2C總線的主機程序分享 3232次閱讀
- I2C總線的特點、控制技術與傳輸分析 9911次閱讀
- u-boot i2c的調試 2158次閱讀
- 《振南電子STM32視頻教程》第八講:I2C總線 1077次閱讀
- 基于FPGA的I2C SLAVE模式總線的設計方案 1.3w次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多