資料介紹
The PCA9544A provides 4 interrupt inputs, one for each channel
and one open drain interrupt output. When an interrupt is generated by
any device, it will be detected by the PCA9544A and the interrupt
output will be driven LOW. The channel need not be active for
detection of the interrupt. A bit is also set in the control byte.
Bits 4 – 7 of the control byte correspond to channels 0 – 3 of the
PCA9544A, respectively. Therefore, if an interrupt is generated by
any device connected to channel 2, the state of the interrupt inputs is
loaded into the control register when a read is accomplished.
Likewise, an interrupt on any device connected to channel 0 would
cause bit 4 of the control register to be set on the read. The master
can then address the PCA9544A and read the contents of the
control byte to determine which channel contains the device
generating the interrupt. The master can then reconfigure the
PCA9544A to select this channel, and locate the device generating
the interrupt and clear it. The interrupt clears when the device
originating the interrupt clears.
and one open drain interrupt output. When an interrupt is generated by
any device, it will be detected by the PCA9544A and the interrupt
output will be driven LOW. The channel need not be active for
detection of the interrupt. A bit is also set in the control byte.
Bits 4 – 7 of the control byte correspond to channels 0 – 3 of the
PCA9544A, respectively. Therefore, if an interrupt is generated by
any device connected to channel 2, the state of the interrupt inputs is
loaded into the control register when a read is accomplished.
Likewise, an interrupt on any device connected to channel 0 would
cause bit 4 of the control register to be set on the read. The master
can then address the PCA9544A and read the contents of the
control byte to determine which channel contains the device
generating the interrupt. The master can then reconfigure the
PCA9544A to select this channel, and locate the device generating
the interrupt and clear it. The interrupt clears when the device
originating the interrupt clears.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- PCA9544A低電壓4通道I2C和SMBus多路復用器數據表
- PCA9545A PCA9545B PCA9545C—I2C
- PCA9544應用筆記
- PCA9544A—I2C總線多路復用器產品數據手冊
- PCA9516—I2C中繼器產品數據手冊
- PCA9516 5channel I2C hub
- PCA9516 I2C中繼器
- PCA9519 4channel level transla
- PCA9542A 2channel I2C bus mult
- PCA9544中文資料
- PCA9544A I2C多路復用器
- PCA9545A/PCA9545B/PCA9545C I2C
- PCA9546A 4 channel I2C bus swi
- PCA9546A I2C多路復用器和開關
- PCA9548A 8 channel I2C bus swi
- I2C地址跳變問題的調試案例 1115次閱讀
- I2C通信協議及其工作原理 4475次閱讀
- Linux I2C驅動入門知識科普 1515次閱讀
- I2C通信的詳細講解 13.4w次閱讀
- 什么是I2C通信協議? 7569次閱讀
- 開源軟件opencores I2C master控制器控制I2C接口操作原理 6918次閱讀
- i2c總線用來做什么_i2c總線數據傳輸過程 7086次閱讀
- fireflyAIO-3288C主板I2C簡介 1256次閱讀
- Firefly-RK3128主板I2C控制器 1332次閱讀
- 基于MCS-51單片機I2C總線接口電路的設計 3245次閱讀
- I2C總線的工作原理解析 6413次閱讀
- I2C總線的特點、控制技術與傳輸分析 9911次閱讀
- u-boot i2c的調試 2158次閱讀
- ADXL345采用I2C模式與tms320vc5509A接口 3278次閱讀
- 《振南電子STM32視頻教程》第八講:I2C總線 1077次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多