資料介紹
The MAX4990 high-voltage DC-AC converter is ideal for
driving electroluminescent (EL) lamps. The MAX4990
features a wide +2.4V to +5.5V input range that allows
the device to accept a wide variety of voltage sources
such as single-cell lithium-ion (Li+) batteries and higher
voltage battery chargers. The lamp outputs of the
device generate up to 250V peak-to-peak output volt-
age for maximum lamp brightness.
The MAX4990 utilizes an inductor-based boost convert-
er to generate the high voltage necessary to drive an
EL lamp. The boost-converter switching frequency is
set with the combination of an external capacitor con-
nected from SW to GND and an external resistor con-
nected from SLEW to GND.
The MAX4990 uses a high-voltage full-bridge output
stage to convert the high voltage generated by the
boost converter to an AC waveform suitable for driving
the EL panel. The EL output switching frequency is set
with the combination of an external capacitor connect-
ed from EL to GND and an external resistor connected
from SLEW to GND.
The MAX4990 uses a proprietary acoustic noise-reduction
circuit that controls the slew rate of the AC voltage, reduc-
ing audible noise from the EL panel. The slew rate is set
with an external resistor connected from SLEW to GND.
The MAX4990 features an EL lamp dimming control
(DIM) that allows the user to set the EL output voltage
with a PWM signal, a DC analog voltage, or a resistor
connected from the DIM input to GND. A capacitor
placed in parallel to the resistor on DIM allows the user
to program a slow turn-on/-off time that generates a soft
fade-on/fade-off effect of the EL lamp.
The MAX4990 enters a low-power shutdown mode
(100nA max) when the EN and DIM inputs are connected
to GND. The MAX4990 also enters thermal shutdown
if the die temperature rises above +158°C.
The MAX4990 is available in a space-saving, 14-pin,
3mm x 3mm TDFN package and is specified over the
extended -40°C to +85°C operating temperature range.
driving electroluminescent (EL) lamps. The MAX4990
features a wide +2.4V to +5.5V input range that allows
the device to accept a wide variety of voltage sources
such as single-cell lithium-ion (Li+) batteries and higher
voltage battery chargers. The lamp outputs of the
device generate up to 250V peak-to-peak output volt-
age for maximum lamp brightness.
The MAX4990 utilizes an inductor-based boost convert-
er to generate the high voltage necessary to drive an
EL lamp. The boost-converter switching frequency is
set with the combination of an external capacitor con-
nected from SW to GND and an external resistor con-
nected from SLEW to GND.
The MAX4990 uses a high-voltage full-bridge output
stage to convert the high voltage generated by the
boost converter to an AC waveform suitable for driving
the EL panel. The EL output switching frequency is set
with the combination of an external capacitor connect-
ed from EL to GND and an external resistor connected
from SLEW to GND.
The MAX4990 uses a proprietary acoustic noise-reduction
circuit that controls the slew rate of the AC voltage, reduc-
ing audible noise from the EL panel. The slew rate is set
with an external resistor connected from SLEW to GND.
The MAX4990 features an EL lamp dimming control
(DIM) that allows the user to set the EL output voltage
with a PWM signal, a DC analog voltage, or a resistor
connected from the DIM input to GND. A capacitor
placed in parallel to the resistor on DIM allows the user
to program a slow turn-on/-off time that generates a soft
fade-on/fade-off effect of the EL lamp.
The MAX4990 enters a low-power shutdown mode
(100nA max) when the EN and DIM inputs are connected
to GND. The MAX4990 also enters thermal shutdown
if the die temperature rises above +158°C.
The MAX4990 is available in a space-saving, 14-pin,
3mm x 3mm TDFN package and is specified over the
extended -40°C to +85°C operating temperature range.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 《Python編程入門》.pdf 0次下載
- PROTEUS初級教程.pdf 56次下載
- 《抑制開關磁阻電機振動的結構設計研究》pdf 3次下載
- 倒F天線IEEE論文英文版.pdf 0次下載
- 開關電源設計指南.pdf 0次下載
- E4990A阻抗分析儀說明 79次下載
- LM4990 2w 音頻功率放大器可選擇關機邏輯電平 5次下載
- 具有低待機模式的1.2 W音頻功率放大器TS4990 6次下載
- SMC4990音頻功率放大器 151次下載
- NS4990 1.3W單聲道音頻功率放大器
- XPT4990中文資料,(音頻功率放大器)評估板使用說明書
- LM4990,pdf datasheet (2 Watt A
- LM4990,pdf datasheet (2 Watt A
- MAX2361, MAX2363, MAX2365 pdf
- MAX4990中文資料
- PDF輸出時出現錯誤提醒的解決方案 1185次閱讀
- max30100和max30102的區別 4404次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2109次閱讀
- 使用pdf解析可以用來讀取PDF文件中字符串文本,圖片數據 1.3w次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10w次閱讀
- 基于LDO的音頻功放測試技術(LM4990為例) 6220次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.4w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5133次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1755次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 1782次閱讀
- MAX5134-MAX5137內最小的16位DAC 1724次閱讀
- MAX4751,MAX4752,MAX4753低電壓、單電源、四路SPST模擬開關 1w次閱讀
- MAX4617-MAX4619低電壓、CMOS模擬多路復用器/開關 6145次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2036次閱讀
- MAX5970應用電路 2656次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多