資料介紹
The MCP1790/MCP1791 regulator provides up to 70 mA
of current. The input operating voltage range is specified
from 6.0V to 30V continuous, 48V absolute max, making
it ideal for automotive and commercial 12/24 VDC
systems.
The MCP1790/MCP1791 has a tight tolerance output
voltage load regulation of ±0.2% (typical) and a very
good line regulation at ±0.0002%/V (typical). The regulator
output is stable with ceramic, tantalum, and electrolytic
capacitors. The MCP1790/MCP1791 regulator
incorporates both thermal and short circuit protection.
The MCP1790 is the 3-pin version of the MCP1790/
MCP1791 family. The MCP1791 is the 5-pin version
and incorporates a Shutdown input signal and a Power
Good output signal.
The regulator is specifically designed to operate in the
automotive environment and will survive +48V (43.5V
±10%) load dump transients and double-battery jumps.
The device is designed to meet the stringent quiescent
current requirements of the automotive industry. The
device is also designed for the commercial low voltage
fire alarm/detector systems which use 24 VDC to supply
the required alarms throughout buildings. The low
ground current, 110 μA (typ.), of the CMOS device will
provide a power cost savings to the end users over
similar bipolar devices. Typical buildings using hundreds
of 24V powered fire and smoke detectors can
see substantial savings on energy consumption and
wiring gage reduction compared to bipolar regulators.
The MCP1790 device will be offered in the 3-pin
DD-PAK, and SOT-223 packages.
The MCP1791 device will be offered in the 5-pin
DD-PAK, and SOT-223 packages.
The MCP1790/MCP1791 will have a junction temperature
operating range of -40°C to +125°C.
of current. The input operating voltage range is specified
from 6.0V to 30V continuous, 48V absolute max, making
it ideal for automotive and commercial 12/24 VDC
systems.
The MCP1790/MCP1791 has a tight tolerance output
voltage load regulation of ±0.2% (typical) and a very
good line regulation at ±0.0002%/V (typical). The regulator
output is stable with ceramic, tantalum, and electrolytic
capacitors. The MCP1790/MCP1791 regulator
incorporates both thermal and short circuit protection.
The MCP1790 is the 3-pin version of the MCP1790/
MCP1791 family. The MCP1791 is the 5-pin version
and incorporates a Shutdown input signal and a Power
Good output signal.
The regulator is specifically designed to operate in the
automotive environment and will survive +48V (43.5V
±10%) load dump transients and double-battery jumps.
The device is designed to meet the stringent quiescent
current requirements of the automotive industry. The
device is also designed for the commercial low voltage
fire alarm/detector systems which use 24 VDC to supply
the required alarms throughout buildings. The low
ground current, 110 μA (typ.), of the CMOS device will
provide a power cost savings to the end users over
similar bipolar devices. Typical buildings using hundreds
of 24V powered fire and smoke detectors can
see substantial savings on energy consumption and
wiring gage reduction compared to bipolar regulators.
The MCP1790 device will be offered in the 3-pin
DD-PAK, and SOT-223 packages.
The MCP1791 device will be offered in the 5-pin
DD-PAK, and SOT-223 packages.
The MCP1790/MCP1791 will have a junction temperature
operating range of -40°C to +125°C.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 基于MCP1790_Typical Application直流到直流單輸出電源的參考設計
- 基于MCP1790/MCP1791下的70 mA 高電壓穩壓器
- 將設計從MCP201移植到MCP2021A免費下載
- MCP6S21_DataSheet 0次下載
- MCP73826 pdf datasheet
- MCP73827 pdf datasheet
- MCP73828 pdf datasheet
- MCP809/MCP810 pdf datasheet
- MCP1825/MCP1825S pdf datasheet
- MCP1725 pdf datasheet
- MCP1824/MCP1824S pdf datasheet
- MCP1826/MCP1826S pdf datasheet
- MCP1727 pdf datasheet
- MCP1827S pdf datasheet
- MCP1826 pdf datasheet
- ADS1115-16Bit ADC調試方案 3187次閱讀
- MCP3421-18bit ADC調試方案 3026次閱讀
- 分享一個快速閱讀datasheet的方法 2311次閱讀
- 基于MCP2510 CAN控制器實現CAN總線系統智能節點的設計 3885次閱讀
- 六路模擬前端MCP3903的主要特性及應用電路分析 3748次閱讀
- MCP存儲器以及MCP存儲器的應用介紹 4590次閱讀
- 運算放大器MCP651/2/5的性能特點及應用 1122次閱讀
- 采用單片機和MCP2510、MCP2551芯片設計集散型火災報警控制系統 4484次閱讀
- 微雪電子MCP23017 IO擴展模塊16IO口 I2C接口簡介 1.3w次閱讀
- dfrobotCAN-BUS 總線擴展板 V2.0簡介 2082次閱讀
- digilent實時時鐘日歷模塊簡介 1346次閱讀
- AD9如何簡單快速的制作出原理圖符號 7441次閱讀
- 詳解Vernier陽極探測器的信號處理電路測試 1596次閱讀
- RTD Pt100的一種單電源信號調理電路 1.3w次閱讀
- dsPIC3F3013的CAN總線數據采集系統 1907次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多