資料介紹
The MAX4069–MAX4072 low-cost, bidirectional, highside,
current-sense amplifiers are ideal for monitoring
battery charge and discharge currents in notebooks,
cell phones, and other portable equipment. They feature
up to 24V input common-mode voltage range, low
100μA supply current (which drops to only 10μA in
shutdown), and a total output error of less than 1.5%.
The wide 1.35V to 24V input common-mode range is
independent of the supply voltage, ensuring that the
current-sense feedback remains accurate even when
connected to a battery pack in deep discharge.
To achieve maximum flexibility, an external current-sense
resistor is used along with a Gain Select pin to choose
either 50V/V or 100V/V. A single output pin continuously
monitors the transition from charge to discharge and
avoids the need for a separate polarity output. The
MAX4070 contains an internal 2.5V reference. The
charging current is represented by an output voltage
from 2.5V to VCC, while discharge current is given from
2.5V to GND. The MAX4071 is similar, but with a reference
voltage of 1.5V. The MAX4069 has an adjustable
reference voltage, set by two external resistors. The
MAX4072 has an input for an external reference.
The MAX4069/MAX4071/MAX4072 operate from a 2.7V to
24V single supply. The MAX4070 operates from a 3.6V to
24V single supply. All devices are specified over the
automotive operating temperature range, -40°C to
+125°C. The MAX4070/MAX4071/MAX4072 are available
in 8-pin μMAX and 8-pin thin QFN packages. The
MAX4069 is available in a 10-pin μMAX package.
Applications
Notebook Fuel Gauging
Smart-Battery Packs/Chargers
Motor Control
Power-Management Systems
Cell-Phone Battery-Current Monitoring
current-sense amplifiers are ideal for monitoring
battery charge and discharge currents in notebooks,
cell phones, and other portable equipment. They feature
up to 24V input common-mode voltage range, low
100μA supply current (which drops to only 10μA in
shutdown), and a total output error of less than 1.5%.
The wide 1.35V to 24V input common-mode range is
independent of the supply voltage, ensuring that the
current-sense feedback remains accurate even when
connected to a battery pack in deep discharge.
To achieve maximum flexibility, an external current-sense
resistor is used along with a Gain Select pin to choose
either 50V/V or 100V/V. A single output pin continuously
monitors the transition from charge to discharge and
avoids the need for a separate polarity output. The
MAX4070 contains an internal 2.5V reference. The
charging current is represented by an output voltage
from 2.5V to VCC, while discharge current is given from
2.5V to GND. The MAX4071 is similar, but with a reference
voltage of 1.5V. The MAX4069 has an adjustable
reference voltage, set by two external resistors. The
MAX4072 has an input for an external reference.
The MAX4069/MAX4071/MAX4072 operate from a 2.7V to
24V single supply. The MAX4070 operates from a 3.6V to
24V single supply. All devices are specified over the
automotive operating temperature range, -40°C to
+125°C. The MAX4070/MAX4071/MAX4072 are available
in 8-pin μMAX and 8-pin thin QFN packages. The
MAX4069 is available in a 10-pin μMAX package.
Applications
Notebook Fuel Gauging
Smart-Battery Packs/Chargers
Motor Control
Power-Management Systems
Cell-Phone Battery-Current Monitoring
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX4069和MAX4072電流檢測放大器的數據手冊免費下載 0次下載
- 基于MAX4069的電流測量電路設計
- MAX6369–MAX6374 datasheet pdf
- MAX6033 datasheet pdf
- MAX1684,MAX1685 datasheet pdf
- MAX1647,MAX1648 datasheet pdf
- MAX1645,MAX1645A datasheet pdf
- MAX481,MAX483,MAX485,MAX487–MAX491 datasheet pdf
- MAX700,MAX701,MAX702 datasheet
- MAX603,MAX604 datasheet pdf
- MAX130, MAX131 pdf datasheet (
- MAX9928, MAX9929 pdf datasheet
- MAX4464, MAX4470 pdf datasheet
- MAX516 pdf datasheet
- MAX514 pdf datasheet
- max30100和max30102的區別 4404次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2109次閱讀
- 調整MAX8660/MAX8661的輸出電壓 839次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10w次閱讀
- cd4069中文資料詳解(cd4069引腳圖及功能_工作原理_內部結構及應用電路) 32w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.4w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5133次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1755次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 1782次閱讀
- MAX5134-MAX5137內最小的16位DAC 1724次閱讀
- MAX4751,MAX4752,MAX4753低電壓、單電源、四路SPST模擬開關 1w次閱讀
- MAX705-MAX708,MAX813低成本、微處理器監控電路 5560次閱讀
- MAX4617-MAX4619低電壓、CMOS模擬多路復用器/開關 6145次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2036次閱讀
- MAX5970應用電路 2656次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多