資料介紹
The GD65232 and GD75232 combine three drivers and five receivers from the Texas Instruments
trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout
matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required,
and allow easy interconnection of the UART and serial-port connector of an IBM? PC/AT and compatibles. The
bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this
function at the expense of quiescent power and external passive components relative to the SN75C185.
The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28
standards. These standards are for data interchange between a host computer and a peripheral at signaling
rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s
with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected
unless the designer has design control of the cable and the interface circuits at both ends. For interoperability
at signaling rates up to 120 kbit/s, use of ANSI TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.
trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout
matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required,
and allow easy interconnection of the UART and serial-port connector of an IBM? PC/AT and compatibles. The
bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this
function at the expense of quiescent power and external passive components relative to the SN75C185.
The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28
standards. These standards are for data interchange between a host computer and a peripheral at signaling
rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s
with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected
unless the designer has design control of the cable and the interface circuits at both ends. For interoperability
at signaling rates up to 120 kbit/s, use of ANSI TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- GD65232.GD75232多個RS-232驅動器和接收器數據表
- GD32F103xx_Datasheet_Rev2.8手冊 33次下載
- GD32F330xx_Datasheet_Rev1.2 pdf下載 44次下載
- GD32F101xx_Datasheet_Rev2.1 39次下載
- GD32F103xx_Datasheet_Rev2.2 28次下載
- GD32F105xx_Datasheet_Rev1.1 54次下載
- GD32F107xx_Datasheet_Rev1.1 18次下載
- GD32F130xx_Datasheet_Rev2.0 121次下載
- GD32F150xx_Datasheet_Rev2.1 35次下載
- GD32F170xx Datasheet Rev1.0 36次下載
- GD32F190xx Datasheet Rev1.0 30次下載
- GD32F205xx_Datasheet_Rev1.0 64次下載
- GD32F207xx_Datasheet_Rev1.0 13次下載
- GD32F103xx-Datasheet-Rev2.2 24次下載
- GD32F207xx_Datasheet_Rev1.01 62次下載
- 【GD32 MCU入門教程】GD32 MCU GPIO 結構與使用注意事項 152次閱讀
- 【GD32 MCU 移植教程】7、從 GD32F10x 移植到 GD32E103 120次閱讀
- 【GD32 MCU 移植教程】6、從GD32F1x0和GD32F3x0移植到GD32E230 114次閱讀
- 【GD32 MCU 移植教程】5、GD32E230 系列移植到 GD32F330 系列 347次閱讀
- 【GD32 MCU 移植教程】2、從 GD32F303 移植到 GD32F503 979次閱讀
- 【GD32 MCU 入門教程】GD32 MCU FPU 使用方法 179次閱讀
- 【GD32 MCU 入門教程】二、GD32 MCU 燒錄說明(3)脫機燒錄 508次閱讀
- GD32F303為什么啟動慢? 1043次閱讀
- GD32 串口接受異常的幾個原因 3792次閱讀
- GD32 MCU的選項字節是什么? 1017次閱讀
- 芯片GD32與以太網芯片的坑 1342次閱讀
- STM32、GD32、ESP32的區別 2874次閱讀
- GD32單片機和STM32單片機的區別 8537次閱讀
- GD的抗干擾能力為何不如STM32 6960次閱讀
- GD32330C-START開發板試用體驗:+ 串口USART收發數據 5283次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多