資料介紹
The MAX1778, MAX1880, MAX1881 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power step-up converter and two low-power charge pumps convert the 2.7V to 5.5V input voltage into three independent output voltages. A built-in linear regulator and VCOM buffer complete the power-supply requirements.
The main step-up converter accurately generates an externally set output voltage up to 13V that can supply the display's row/column drivers. The converter's high switching frequency and current-mode PWM architecture provide fast transient response and allow the use of small low-profile inductors and ceramic capacitors. The low-power BiCMOS control circuitry and internal 14V switch (0.35≈ N-channel MOSFET) enable efficiencies up to 91%.
The dual low-power charge pumps (MAX1778/ MAX1880/MAX1881/MAX1882 only) independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and -40V. A unique control scheme minimizes output ripple as well as capacitor sizes for both charge pumps.
A resistor-programmable, 40mA, low-dropout linear regulator (MAX1778/MAX1881/MAX1883/MAX1884 only) provides preregulation or postregulation for any of the supplies. For higher current applications, an external transistor can be added. Additionally, the VCOM buffer provides a high current output that is ideal for driving the capacitive backplane of TFT LCD panels. The VCOM buffer's output voltage is preset with an internal 50% resistive-divider or can be externally adjusted for other voltages.
The MAX1778/MAX1880–MAX1885 are protected against output undervoltage and thermal overload conditions by a latched fault detection circuit that shuts down the device. All devices are available in the ultra-thin TSSOP package (1.1mm max height).
The main step-up converter accurately generates an externally set output voltage up to 13V that can supply the display's row/column drivers. The converter's high switching frequency and current-mode PWM architecture provide fast transient response and allow the use of small low-profile inductors and ceramic capacitors. The low-power BiCMOS control circuitry and internal 14V switch (0.35≈ N-channel MOSFET) enable efficiencies up to 91%.
The dual low-power charge pumps (MAX1778/ MAX1880/MAX1881/MAX1882 only) independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and -40V. A unique control scheme minimizes output ripple as well as capacitor sizes for both charge pumps.
A resistor-programmable, 40mA, low-dropout linear regulator (MAX1778/MAX1881/MAX1883/MAX1884 only) provides preregulation or postregulation for any of the supplies. For higher current applications, an external transistor can be added. Additionally, the VCOM buffer provides a high current output that is ideal for driving the capacitive backplane of TFT LCD panels. The VCOM buffer's output voltage is preset with an internal 50% resistive-divider or can be externally adjusted for other voltages.
The MAX1778/MAX1880–MAX1885 are protected against output undervoltage and thermal overload conditions by a latched fault detection circuit that shuts down the device. All devices are available in the ultra-thin TSSOP package (1.1mm max height).
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- AD1881年:AC‘97聲音Max Codec過時的數據Sheet
- MAX764-MAX766資料下載 9次下載
- MAX1778,MAX1880-MAX1885資料(第二次修改版) 0次下載
- MAX16065, MAX16066,pdf,中文資料,閃存
- MAX6369–MAX6374 datasheet pdf
- MAX1647,MAX1648 datasheet pdf
- MAX481,MAX483,MAX485,MAX487–MAX491 datasheet pdf
- MAX2359, MAX2530, MAX2531 pdf
- MAX2351, MAX2354, MAX2358 pdf
- MAX1884, MAX1885 pdf datasheet
- MAX693, MAX694, MAX695 pdf dat
- MAX690, MAX691, MAX692 pdf dat
- MAX130, MAX131 pdf datasheet (
- MAX4158, MAX4159, MAX4258, MAX
- MAX2361, MAX2363, MAX2365 pdf
- max30100和max30102的區別 4404次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2109次閱讀
- 用于CDMA系統的MAX2206/MAX2208功率檢測器 582次閱讀
- MAX2206/MAX2208功率檢波器,用于CDMA應用 630次閱讀
- 調整MAX8660/MAX8661的輸出電壓 839次閱讀
- 功率檢測器MAX2206/MAX2208的基本性能特點及應用研究 3057次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10w次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1755次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 1782次閱讀
- MAX5134-MAX5137內最小的16位DAC 1724次閱讀
- MAX4751,MAX4752,MAX4753低電壓、單電源、四路SPST模擬開關 1w次閱讀
- MAX705-MAX708,MAX813低成本、微處理器監控電路 5560次閱讀
- MAX4617-MAX4619低電壓、CMOS模擬多路復用器/開關 6145次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2036次閱讀
- MAX5970應用電路 2656次閱讀
下載排行
本周
- 1使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 2Keysight B1500A 半導體器件分析儀用戶手冊、說明書 (中文)
- 19.00 MB | 4次下載 | 免費
- 3BT134雙向可控硅手冊
- 1.74 MB | 2次下載 | 1 積分
- 4一種新型高效率的服務器電源系統
- 0.85 MB | 1次下載 | 1 積分
- 5PR735,使用UCC28060的600W交錯式PFC轉換器
- 540.03KB | 1次下載 | 免費
- 6WTS-100(1.1) UWB 信標定位系統 彩頁
- 540.48 KB | 1次下載 | 免費
- 7聯想E46L DAOLL6筆記本電腦圖紙
- 1.10 MB | 1次下載 | 5 積分
- 8MATLAB繪圖合集
- 27.12 MB | 1次下載 | 5 積分
本月
- 1使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 2UC3842/3/4/5電源管理芯片中文手冊
- 1.75 MB | 15次下載 | 免費
- 3DMT0660數字萬用表產品說明書
- 0.70 MB | 13次下載 | 免費
- 4ST7789V2單芯片控制器/驅動器英文手冊
- 3.07 MB | 11次下載 | 1 積分
- 5TPS54202H降壓轉換器評估模塊用戶指南
- 1.02MB | 8次下載 | 免費
- 6STM32F101x8/STM32F101xB手冊
- 1.69 MB | 8次下載 | 1 積分
- 7TPS92682-Q1幀定義和示例
- 891.71KB | 6次下載 | 免費
- 8HY12P65/HY12P66數字萬用表芯片規格書
- 0.69 MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935119次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73807次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65987次下載 | 10 積分
評論
查看更多