資料介紹
The MAX1183 is a 3V, dual 10-bit analog-to-digital converter
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX9526,pdf datasheet (Low-Pow
- MAX1180 pdf datasheet (Low-Pow
- MAX1181 pdf datasheet (Low-Pow
- MAX1182 pdf datasheet (Low-Pow
- MAX1184 pdf datasheet (Low-Pow
- MAX1185 pdf datasheet (Low-Pow
- MAX1190 pdf datasheet (Low-Pow
- MAX1195 pdf datasheet (Low-Pow
- MAX1196 pdf datasheet (Low-Pow
- MAX1197 pdf datasheet (Low-Pow
- MAX2141 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC7311 pdf datasheet (Low-Pow
- 低代碼(Low-Code)是什么?低代碼的特點有哪些? 2621次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2109次閱讀
- 分享一個快速閱讀datasheet的方法 2311次閱讀
- SLVS是什么 SLVS走線對信號完整性的影響 1761次閱讀
- POW挖空塊的原理及解決辦法 1156次閱讀
- 如何閱讀Datasheet,是作為電子工程師的必備技能! 7837次閱讀
- PowerInt SID1183K單路1700V IGBT和MOSFET驅動方案 5872次閱讀
- AD9如何簡單快速的制作出原理圖符號 7441次閱讀
- 使用pdf解析可以用來讀取PDF文件中字符串文本,圖片數據 1.3w次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.4w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5133次閱讀
- MAX8873,MAX8874低壓差、120mA線性穩壓器數據資料 1412次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1755次閱讀
- MAX5970應用電路 2656次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多