資料介紹
The MAX5978 hot-swap controller provides complete protection for systems with a supply voltage from 0 to 16V. The device includes four programmable LED outputs.
The IC provides two programmable levels of overcurrent circuit-breaker protection: a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off. The maximum overcurrent circuit-breaker threshold range is set with a trilevel logic input (IRNG), or by programming through the I2C interface.
The IC is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC, which is continuously multiplexed to convert the output voltage and current at 10ksps. Each 10-bit sample is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I2C interface at any time or after a fault condition.
The device includes five user-programmable digital comparators to implement overcurrent warning and two levels of overvoltage/undervoltage detection. When measured values violate the programmable limits, an external active-low ALERT output is asserted. In addition to the active-low ALERT signal, the IC can be programmed to deassert the power-good signal and/or turn off the external MOSFET.
The IC features four I/Os that can be independently configured as general-purpose input/outputs (GPIOs) or as open-drain LED drivers with programmable blinking. These four I/Os can be configured for any mix of LED driver or GPIO function.
The device is available in a 32-pin thin QFN-EP package and operates over the -40°C to +85°C extended temperature range.
The IC provides two programmable levels of overcurrent circuit-breaker protection: a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off. The maximum overcurrent circuit-breaker threshold range is set with a trilevel logic input (IRNG), or by programming through the I2C interface.
The IC is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC, which is continuously multiplexed to convert the output voltage and current at 10ksps. Each 10-bit sample is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I2C interface at any time or after a fault condition.
The device includes five user-programmable digital comparators to implement overcurrent warning and two levels of overvoltage/undervoltage detection. When measured values violate the programmable limits, an external active-low ALERT output is asserted. In addition to the active-low ALERT signal, the IC can be programmed to deassert the power-good signal and/or turn off the external MOSFET.
The IC features four I/Os that can be independently configured as general-purpose input/outputs (GPIOs) or as open-drain LED drivers with programmable blinking. These four I/Os can be configured for any mix of LED driver or GPIO function.
The device is available in a 32-pin thin QFN-EP package and operates over the -40°C to +85°C extended temperature range.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- Hot Swap Controllers
- Hot Swap Controllers
- High Power Hot Swap Controllers
- MAX15091,MAX15091A數據資料 16次下載
- MAX15090,MAX15090A數據資料 16次下載
- MAX5977A,MAX5977B數據資料 15次下載
- MAX5976/MAX5976A/MAX5976B,pdf
- TPS2300,TPS2301,pdf(Dual Hot-S
- TPS2311,TPS2310,pdf(Dual Hot-S
- TPS2320,TPS2321,pdf(Dual Hot-S
- TPS2330,TPS2331,pdf(Single Hot
- MAX5970,pdf (0V to 16V, Dual H
- ADM4210,datasheet,pdf(Hot Swap
- MAX5930A/MAX5931A/MAX5931B pdf
- MAX5927A/MAX5929 pdf
- 松下Smart Projector Control App手機配置無線控制使用介紹 459次閱讀
- MCUboot Swap模式升級的流程和注意事項 440次閱讀
- 如何在linux系統配置交換分區(swap)呢? 1066次閱讀
- OTA的swap Bank AB升級方案 1591次閱讀
- 扒一扒PCIe中的Flow Control 1993次閱讀
- 微軟提出Control-GPT:用GPT-4實現可控文本到圖像生成! 708次閱讀
- 熱插拔技術的詳細講解 2.3w次閱讀
- 基于PCI9656和MAXII EPM1270實現數據接收卡的應用方案 2600次閱讀
- 什么是Swap分區 NVMe上如何使用Swap分區 4085次閱讀
- 什么是SWaP?一些直接影響SWaP的重大成就 1.5w次閱讀
- Flow Control機制可以顯著地提高總線的傳輸效率 6980次閱讀
- PCIe總線必須要先完成Flow Control初始化 7779次閱讀
- 采用Flow Control機制的PCIe總線 5711次閱讀
- MAX5970應用電路 2656次閱讀
- 亮度控制小燈電路--Brightness Control f 3707次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多