資料介紹
The SN74AUP1T157 is a single 2-input multiplexer that selects data from two data inputs (A and B) under control of a common data select input (C). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form.
AUP technology is the industry’s lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V VCC supply. This product also maintains excellent signal integrity (see Figure 2 and Figure 3).
The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors.
Schmitt-trigger inputs (VT = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.
Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions.
The SN74AUP1T157 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.
- SN74AUP1T98,pdf(Single-Supply
- SN74AUP1T97,pdf(Single-Supply
- SN74AUP1T58,pdf(Single-Supply
- SN74AUP1T57,pdf(Single-Supply
- SN74AUP1T87,pdf(Low Power, 1.8
- SN74AUP1T86,pdf(Low Power, 1.8
- SN74AUP1T32,pdf(Low Power, 1.8
- SN74AUP1T17,pdf(Low Power, 1.8
- SN74AUP1T158,pdf(Low Power, 1.
- SN74AUP1T14,pdf(Low Power, 1.8
- SN74AUP1T08,pdf(Low Power, 1.8
- SN74AUP1T04,pdf(Low Power, 1.8
- SN74AUP1T02,pdf(Low Power, 1.8
- SN74AUP1T00,pdf(Low Power, 1.8
- SN74AUP1G74,pdf(Low-Power Sing
- 工業以太網標準10BASE-T1L的最佳PHY是什么呢? 1765次閱讀
- 芯片功耗的Power弱連接分析(1) 361次閱讀
- T13-1T-X65+射頻變壓器的特點分析 424次閱讀
- DS31256的分數級T1 (FT1)環回檢測 665次閱讀
- 在DS上啟用分數T1環回檢測 669次閱讀
- 與小數T1和E1接口 1300次閱讀
- T1和E1之間的轉換 1667次閱讀
- ST STM32MP157C高性能低功耗MPU開發方案 1.6w次閱讀
- 淺談SN74HC541特征應用及設備信息 3570次閱讀
- 分享SN74HC541N集成塊的功能及邏輯圖函數表 1.1w次閱讀
- 74HC154芯片的E1和E2端口作用是什么?74HC154的應用實例 6033次閱讀
- 74ls163實現任意進制計數器 8.7w次閱讀
- 74ls157中文資料匯總(74ls157引腳圖及功能_邏輯圖及特性參數) 10.1w次閱讀
- Low Power概念介紹<SRPG Cell> 1.2w次閱讀
- SN74LS161在數字電路中的抗干擾應用 7065次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多