資料介紹
The AD9577 provides a multioutput clock generator function along with two on-chip phase-locked loop cores, PLL1 and PLL2, optimized for network clocking applications. The PLL designs are based on Analog Devices, Inc., proven portfolio of high performance, low jitter frequency synthesizers to maximize network performance. The PLLs have I2C programmable output frequencies and formats. The fractional-N PLL can support spread spectrum clocking for reduced EMI radiated peak power. Both PLLs can support frequency margining.
The first integer-N PLL section (PLL1) consists of a phase frequency detector (PFD), a charge pump (CP), a low noise voltage controlled oscillator (VCO), a programmable feedback divider, and two independently programmable output dividers. By connecting an external crystal or reference clock to the REFCLK pin, frequencies up to 637.5 MHz can be synchronized to the input reference. Each output divider and feedback divider ratio can be factory or I2C programmed for the required output rates.
A second fractional-N PLL (PLL2) with a programmable modulus allows VCO frequencies that are fractional multiples of the reference frequency to be synthesized. Each output divider and feedback divider ratio can be factory programmed for the required output rates, up to 637.5 MHz. This fractional-N PLL can also operate in integer-N mode for the lowest jitter.
Up to four differential output clock signals can be configured as either LVPECL or LVDS signaling formats. Alternatively, each output pair can be configured for up to eight CMOS outputs. Combinations of these formats are supported. No external loop filter components are required, thus conserving valuable design time and board space. The AD9577 is available in a 40-lead, 6 mm × 6 mm LFCSP package and can operate from a single 3.3 V supply. The operating temperature range is ?40°C to +85°C.
APPLICATIONS
Low jitter, low phase noise multi-output clock generator for data communications applications including Ethernet, Fibre Channel, SONET, SDH, PCI-e, SATA, PTN, OTN, ADC/DAC, and digital video
Spread spectrum clocking
- 9FGx08 PCIe Clock Generator 評估板s 用戶指南
- 9FGx08 PCIe Clock Generator 評估板s 用戶指南
- AD9577評估軟件
- AD9577:帶雙鎖相環、擴頻和余量的時鐘發生器數據表
- AD9540:?655 MHz Low Jitter Clock Generator Data Sheet
- AD9518-1: 6-Output Clock Generator with Integrated 2.5 GHz VCO Data Sheet
- AD9517-3: 12-Output Clock Generator with Integrated 2.0 GHz VCO Data Sheet
- AD9518-0: 6-Output Clock Generator with Integrated 2.8 GHz VCO Data Sheet
- AD9518-2: 6-Output Clock Generator with Integrated 2.2 GHz VCO Data Sheet
- AD9518-4: 6-Output Clock Generator with Integrated 1.6 GHz VCO Data Sheet
- 雙鎖相環擴頻和冗余時鐘發生器ad9577數據表 17次下載
- ICS307 Clock Generator 0次下載
- RCA-00-A pdf datasheet
- 82C284 pdf datasheet (Clock Ge
- cy25100 pdf datasheet (Field a
- SOC設計中Clock Gating的基本原理與應用講解 1099次閱讀
- XILINX FPGA IP之AXI Traffic Generator 1812次閱讀
- Distributed Memory Generator IP核簡介 1535次閱讀
- Xilinx FPGA IP之Block Memory Generator AXI接口說明 1401次閱讀
- Xilinx FPGA IP之Block Memory Generator功能概述 1947次閱讀
- RQS_CLOCK-12時鐘設置建議 622次閱讀
- FPGA中Bank和Clock Region之前有什么關系? 1005次閱讀
- SYSREF和Device clock是否需要同源?SYSREF有哪幾種模式? 3506次閱讀
- 分享一個快速閱讀datasheet的方法 2311次閱讀
- 分析clock tree的小工具——CCOPT Clock Tree Debugger(一) 1w次閱讀
- 降低Clock Uncertainty流程 5317次閱讀
- FPGA開發之算法開發System Generator 7679次閱讀
- System generator如何與MATLAB進行匹配? 7526次閱讀
- system generator入門筆記 3904次閱讀
- 基于System Generator的FPGA開發總結 8295次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多