資料介紹
The Cypress S34ML01G1, S34ML02G1, and S34ML04G1 series is offered with a 3.3-V VCC power supply, and with ×8 or ×16 I/O interface. Its NAND cell provides the most cost-effective solution for the solid state mass storage market. The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. The page size for ×8 is (2048 + 64 spare) bytes; for ×16 (1024 + 32) words. Each block can be programmed and erased up to 100,000 cycles with ECC (error correction code) on. To extend the lifetime of NAND flash devices, the implementation of an ECC is mandatory. The chip supports CE# don‘t care function. This function allows the direct download of the code from the NAND flash memory device by a microcontroller, since the CE# transitions do not stop the read operation. The devices have a Read Cache feature that improves the read throughput for large files. During cache reading, the devices load the data in a cache register while the previous data is transferred to the I/O buffers to be read. Like all other 2-kB page NAND flash devices, a program operation typically writes 2112 bytes (×8), or 1056 words (×16) in 200 μs and an erase operation can typically be performed in 2 ms (S34ML01G1) on a 128-kB block (×8) or 64-kword block (×16)。 In addition, thanks to multiplane architecture, it is possible to program two pages at a time (one per plane) or to erase two blocks at a time (again, one per plane)。 The multiplane architecture allows program time to be reduced by 40% and erase time to be reduced by 50%. In multiplane operations, data in the page can be read out at 25 ns cycle time per byte. The I/O pins serve as the ports for command and address input as well as data input/output. This interface allows a reduced pin count and easy migration towards different densities, without any rearrangement of the footprint.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
- ML-01-SC 手册1次下载
- S1D13L01 WQVGA简单液晶控制器0次下载
- 嵌入式NAND闪存S34ML16G2数据手册0次下载
- 嵌入式系统系列丛书-时间触发嵌入式系统设计模式0次下载
- 嵌入式详解64次下载
- 基于arm11的嵌入式linux中nrf24l01驱动的实现15次下载
- 嵌入式论文22次下载
- 嵌入式系统定义12次下载
- 嵌入式系统与嵌入式PLC24次下载
- 嵌入式系统与嵌入式PLC29次下载
- 怎么样才能入门嵌入式嵌入式未来的发展方向是怎样的2次下载
- NAND闪存W29N01GV的数据手册免费下载19次下载
- 基于VxWorks6.x中的ML403嵌入式开发平台6次下载
- B/S模式的嵌入式远程检测系统实验33次下载
- 嵌入式系统中闪存设备I/O 软件的设计与实现10次下载
- 嵌入式fpga是什么意思 1310次閱讀
- fpga是嵌入式嗎 2420次閱讀
- 什么是嵌入式系統?嵌入式系統的具體應用 2562次閱讀
- Arm?ML處理器 嵌入式評估工具包介紹 8193次閱讀
- 嵌入式系統的全面解析 3280次閱讀
- 如何實現嵌入式系統遠程調試 5401次閱讀
- 什么是嵌入式技術 1w次閱讀
- 嵌入式應用框架EAF詳解 2892次閱讀
- 關于嵌入式系統以及嵌入式平臺下的學科分工詳解 2025次閱讀
- 嵌入式系統的特點大匯總 5896次閱讀
- 嵌入式行業發展狀況_嵌入式行業人才需求_嵌入式系統就業前景分析 2.4w次閱讀
- 嵌入式開發就業前景分析_嵌入式領域的職業發展方向 1.8w次閱讀
- 學習嵌入式要什么基礎 4258次閱讀
- 典型的嵌入式系統設計 2716次閱讀
- 基于ARM的嵌入式無線視頻采集系統設計 1888次閱讀
下載排行
本周
- 1RA4M2_Sensor-V1.0 原理圖
- 586.91 KB | 1次下載 | 免費
- 2RA4M2-SENSOR開發板手冊
- 746.54 KB | 1次下載 | 免費
- 3珈港科技JC100安全芯片簡介
- 466.19 KB | 1次下載 | 免費
- 4HM-BT2204藍牙透傳模塊規格詳解:功能特性、電氣參數及應用設計指導
- 645.69 KB | 次下載 | 免費
- 5珈港科技JC511安全藍牙芯片簡介
- 352.13 KB | 次下載 | 免費
- 6殼體變形、微孔難測、熱脹冷縮?三坐標檢測電機核心部件真實幾何精度與形位公差
- 982.42 KB | 次下載 | 免費
- 7RY8360 36V輸入,6A輸出,異步降壓型DC/DC轉換器數據手冊
- 0.74 MB | 次下載 | 免費
- 8RY1541AQ20 5通道PMU,配備高低壓降壓、LDO、升壓、超級電容充電器數據手冊
- 0.92 MB | 次下載 | 免費
本月
- 1常用電子元器件集錦
- 1.72 MB | 24496次下載 | 免費
- 2三相逆變主電路的原理圖和PCB資料合集免費下載
- 27.35 MB | 113次下載 | 1 積分
- 3蘋果iphone 11電路原理圖
- 4.98 MB | 19次下載 | 5 積分
- 4PC2456高壓浪涌抑制器控制器數據手冊
- 3.03 MB | 14次下載 | 免費
- 5PC2464具理想二極管的浪涌抑制控制器數據手冊
- 4.42 MB | 9次下載 | 免費
- 6ssd1306單片 CMOS OLED/PLED 驅動芯片中文手冊
- 1.66 MB | 8次下載 | 1 積分
- 7PC2466高電壓浪涌抑制器數據手冊
- 3.37 MB | 8次下載 | 免費
- 8EMC電路設計工程師必備的EMC基礎
- 0.42 MB | 7次下載 | 2 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935132次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233089次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191401次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183345次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81593次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73816次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65990次下載 | 10 積分
評論