The bitstreams for the system are available in the ready_for_download/ directory under the

　　project root directory.

　　Executing the Reference System using the Pre-Built Bitstream and the

　　Compiled Software Applications

　　To execute the system using files inside the ready_for_download/ directory in the project

　　root directory， follow these steps：

　　1. Change directories to the ready_for_download directory.

　　2. Connect the Xilinx Download cable to the board.

　　3. Use iMPACT to download the bitstream by using the following：

　　impact -batch xapp947.cmd

　　4. Invoke XMD and connect to the processor by the following command：

　　xmd -opt xapp947.opt

　　5. Download the executables by the following command：

　　dow 《executable》

　　Executing the Reference System from XPS

　　To execute the system using EDK， follow these steps：

　　1. Open system.xmp inside EDK.

　　2. Use Hardware → Generate Bitstream to generate a bitstream for the system.

　　3. Download the bitstream to the board with Device Configuration → Download Bitstream.

　　4. Launch XMD with Debug → Launch XMD.。.

　　5. Download the executables by the following command：