資料介紹
PRECAUTION AGAINST ESD FOR SEMICONDUCTORSNote: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity. Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. All test and measurement tools including work bench and floor should be grounded. The operator should be grounded using wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for PW boards with semiconductor devices on it.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection for CMOS device inputs can be cause of malfunction. If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of being an output pin. All handling related to the unused pins must be judged device by device and related specifications governing the devices.
3 STATUS BEFORE INITIALIZATION OF MOS DEVICES Note: Power-on does not necessarily define initial status of MOS device. Production process of MOS does not define the initial operation status of the device. Immediately after the power source is turned ON, the devices with reset function have not yet been initialized. Hence, power-on does not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the reset signal is received.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection for CMOS device inputs can be cause of malfunction. If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of being an output pin. All handling related to the unused pins must be judged device by device and related specifications governing the devices.
3 STATUS BEFORE INITIALIZATION OF MOS DEVICES Note: Power-on does not necessarily define initial status of MOS device. Production process of MOS does not define the initial operation status of the device. Immediately after the power source is turned ON, the devices with reset function have not yet been initialized. Hence, power-on does not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the reset signal is received.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- UPD780828A 子系列8位單芯片微控制器,CAN ASSP3 用戶手冊
- V850ES/GB1 VENUS 32位/16位CAN接口單片機硬件用戶手冊
- UPD780828A 子系列8位單芯片微控制器,CAN ASSP3 用戶手冊
- V850ES/GB1 VENUS 32位/16位CAN接口單片機硬件用戶手冊
- AN5354_STM32H7系列微控制器16位ADC的應用手冊
- STM32系列32位微控制器(MCU)/32位微處理器(MPU)選型手冊 4次下載
- 單線通信32位微控制器HC32L130系列產品手冊 5次下載
- 基于ARM32位的微控制器AT32F403A系列 13次下載
- 32位CMOS微控制器S3C2440A用戶手冊 0次下載
- MC9S12G優化的汽車16位微控制器的數據手冊和參考手冊免費下載 79次下載
- SN8P2643系列ADC、運算放大器、比較器8位微控制器用戶手冊免費下載 2次下載
- RL78G13 16位單芯片微控制器的硬件用戶手冊免費下載 26次下載
- 帶CAN 控制器的單片8 位微控制器 8次下載
- 高性能16位XA微控制器系列 5次下載
- NEC78K0/KF1用戶手冊 8位單片微控制器
- 基于stm8系列8位通用微控制器平臺的電容式觸摸傳感方案 2285次閱讀
- 基于PWM 通道的16位定時器/計數器精確模擬功能 2087次閱讀
- 78K0/Ix2 8位單片微控制器的性能特性及應用方案 2983次閱讀
- 液位控制器怎么調試 1.7w次閱讀
- 基于微控制器TMS320F2812和CAN收發器實現新型執行器的設計 1447次閱讀
- LPC540xx是基于ARM Cortex-M4的32位微控制器 2279次閱讀
- 飛思卡爾新款Flexis微控制器資料 4682次閱讀
- 一文看懂8位,16位和32位單片機的區別 12.3w次閱讀
- 16位單片機對AD9854控制的探討 6445次閱讀
- LM3S9B92微控制器特性參數與Stellaris機器人評估板介紹 2379次閱讀
- 基于Kinetis微控制器和16位/24位MAX5556的立體聲音頻接口設計 1512次閱讀
- 手把手教你如何選擇合適的微控制器? 6926次閱讀
- Silicon Labs 32 位微控制器的 10 大技術特點 1222次閱讀
- MAXQ614 16位微控制器芯片詳解 1886次閱讀
- 雙向可控硅液位控制器電路 4570次閱讀
下載排行
本周
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 2雷達的基本分類方法
- 1.25 MB | 4次下載 | 4 積分
- 3電感技術講解
- 827.73 KB | 2次下載 | 免費
- 4從 MSP430? MCU 到 MSPM0 MCU 的遷移指南
- 1.17MB | 2次下載 | 免費
- 5有源低通濾波器設計應用說明
- 1.12MB | 2次下載 | 免費
- 6RA-Eco-RA2E1-48PIN-V1.0開發板資料
- 35.59 MB | 2次下載 | 免費
- 7面向熱插拔應用的 I2C 解決方案
- 685.57KB | 1次下載 | 免費
- 8愛普生有源晶體振蕩器SG3225EEN應用于儲能NPC、新能源
- 317.46 KB | 1次下載 | 免費
本月
- 12024年工控與通信行業上游發展趨勢和熱點解讀
- 2.61 MB | 763次下載 | 免費
- 2HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 3繼電保護原理
- 2.80 MB | 36次下載 | 免費
- 4正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 32次下載 | 1 積分
- 5labview實現DBC在界面加載配置
- 0.57 MB | 21次下載 | 5 積分
- 6在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 7GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 14次下載 | 免費
- 8H橋中的電流感測
- 545.39KB | 7次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多