色哟哟视频在线观看-色哟哟视频在线-色哟哟欧美15最新在线-色哟哟免费在线观看-国产l精品国产亚洲区在线观看-国产l精品国产亚洲区久久

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>接口技術>Recommended Initialization Sequence for the MAX3955 and MAX3956 Devices

Recommended Initialization Sequence for the MAX3955 and MAX3956 Devices

2017-03-30 | pdf | 0.86 MB | 次下載 | 免費

資料介紹

  Read the TOPSTAT register. The MAX395X is no longer in POR when this register reads back 010X XXXX.

  The Initialization Required Flag is a firmware flag stating that the MAX395X needs to be initialized. This flag should be set following POR of the microcontroller and whenever the MAX395X is in a POR or brownout state.

  Only continue this initialization routine if the MAX395X needs to be initialized because of POR or brownout.

  Read the TXSTAT1 Register to verify that the VCCT, VCCTO, VOUT, TOUTA, and TOUTC voltages are all in a valid operating range. These voltages are valid when TXSTAT1 = 0XXX 000X.

  The factory-programmed calibration constants MUST be loaded to ensure proper operation of the MAX395X. This is done by writing the data shown in the flow chart.

  Optional Step: Wait for the VCCX, VCCT, and VCCTO voltages read from the MAX395X to be greater than 2.8V. This will help ensure that a possible drop in supply voltage will not produce a brownout condition when the MAX395X is initialized and laser current ramps. If these voltages will be monitored, a wait of at least 40ms must be added while waiting for the first conversions of the DDM parameters to complete.

  Send the Fault Clear command, which is done by writing 68h to the MODECTRL register at address 00h. This will deassert the FAULT pin if a temporary fault occurred during the power-supply ramp.

  Initialize all of the MAX395X registers to their correct application-specific values.

  Clear the Initialization Required Flag since the MAX395X has now been properly initialized.

  Note 1: The MAX395X Status Register (including TOPSTAT and TXSTAT1) contain sticky bits, meaning the bits will remain set until they are read. Once read, the bits are reset to zero if the source of the flag has been removed. Because the status bits are sticky bits, multiple register reads may be required before the status bits read back clear.

  Note 2: The flow shown is for a routine that will be called once every time the microcontroller’s main processing loop is executed. This allows checking for completion of POR and also for any subsequent brownout condition with the same routine. This flow is designed to not hold the microprocessor while waiting for the flags to clear; instead the microprocessor will check again the next time through the main loop. Similar flows can be developed that will poll the MAX395X flags continuously until they are clear.
?

Recommended Initialization Sequence for the MAX3955 and MAX3956 Devices


?

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1497次下載  |  免費
  3. 2TC358743XBG評估板參考手冊
  4. 1.36 MB  |  330次下載  |  免費
  5. 3單片機典型實例介紹
  6. 18.19 MB  |  99次下載  |  1 積分
  7. 4S7-200PLC編程實例詳細資料
  8. 1.17 MB  |  28次下載  |  1 積分
  9. 5筆記本電腦主板的元件識別和講解說明
  10. 4.28 MB  |  18次下載  |  4 積分
  11. 6開關電源原理及各功能電路詳解
  12. 0.38 MB  |  14次下載  |  免費
  13. 79天練會電子電路識圖
  14. 5.91 MB  |  6次下載  |  免費
  15. 8100W短波放大電路圖
  16. 0.05 MB  |  4次下載  |  3 積分

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33564次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30321次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21540次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935054次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537794次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183278次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
主站蜘蛛池模板: 成在线人免费视频| 久久精品国产福利电影网| 免费鲁丝片一级在线观看| 午夜国产精品免费观看| 9久久免费国产精品特黄| 精品人妻一区二区三区视频53 | 再插深点嗯好大好爽| 国产成人免费片在线观看| 免费一级特黄欧美大片久久网| 亚洲 中文 自拍 无码| 变态露出野外调教| 免费无码又爽又黄又刺激网站| 亚洲欧美日韩另类精品一区二区三区| 大桥未久在线看| 欧美gv明星| 中文字幕成人| 九九热在线视频| 亚洲精品九色在线网站| 国产MD视频一区二区三区 | 亚洲三级在线视频| 国产精品久久久久久久人热| 青青草在线视频| 97无码欧美熟妇人妻蜜| 久久这里只有是精品23| 亚洲欧美中文字幕高清在线| 国产精品免费视频能看| 三级在线网址| 伧理片午夜伧理片| 欧美日韩中文字幕综合图区| 最新无码二区日本专区| 久久精品熟女亚洲AV国产| 亚洲蜜桃AV永久无码精品放毛片 | 美女视频黄色的| 又紧又大又爽精品一区二区 | 色偷偷网站| 成人免费网址在线| 日本xxx片免费高清在线| xxnx日本| 免费麻豆国产黄网站在线观看| 伊人色综合久久天天| 精品美女国产互换人妻 |