資料介紹
Table of Contents
nanoDAC+ No-OS Driver
Supported Devices
Overview
The AD5673R, AD5674R, AD5676, AD5676R, AD5675, AD5675R, AD5677R, AD5679R,AD5686, AD5686R, AD5696, AD5696R / AD5685R, AD5695R / AD5672R, AD5671R, AD5684, AD5684R, AD5694, AD5694R, AD5681R, AD5682R, AD5683R, AD5683, AD5691R, AD5692R, AD5693R, AD5693 are low power, single-channel/octal/quad, 16-/14-/12-bit, buffered voltage output digital-to-analog converter (DAC). All devices operate from a single 2.7 V to 5.5 V supply and are guaranteed monotonic by design.
The AD5673R, AD5674R, AD5676, AD5676R, AD5675, AD5675R, AD5677R, AD5679R,AD5686, AD5686R, AD5696, AD5696R / AD5685R, AD5695R / AD5672R, AD5671R, AD5684, AD5684R, AD5694, AD5694R include a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2).
The AD5673R, AD5674R, AD5676, AD5676R, AD5675, AD5675R, AD5672R, AD5671R,AD5677R, AD5679R, AD5686, AD5686R, AD5685R, AD5684, AD5684R, AD5695R, AD5694, AD5694R, AD5696, AD5696R,AD5681R, AD5682R, AD5683R, AD5683, AD5691R, AD5692R, AD5693R, AD5693 also incorporates a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain there until a valid write takes place. Each device contains a per channel power-down feature that reduces the current consumption of the device to 2 μA/2.5 μA / 4 μA while in power-down mode.
The AD5674R, AD5676, AD5676R, AD5672R, AD5679R, AD5686, AD5686R, AD5685R, AD5684, AD5684R, AD5681R, AD5682R, AD5683R, AD5683 employs a versatile serial peripheral interface (SPI) that operates at clock rates up to 50 MHz.
The AD5673R, AD5675, AD5675R, AD5677R, AD5695R, AD5671R, AD5694, AD5694R, AD5696, AD5696R, AD5691R, AD5692R, AD5693R, AD5693 use a versatile 2-wire serial interface that operates at clock rates up to 400 kHz.
All devices contain a VLOGIC pin intended for 1.8 V/3 V/5 V logic.
Applications:
- Optical transceivers
- Base-station power amplifiers
- Industrial automation
- Data acquisition systems
Driver Description
Functions Declarations
Function | Description |
---|---|
int32_t ad5686_init(struct ad5686_dev **device, struct ad5686_init_param init_param); | Initialize the device. |
int32_t ad5686_remove(struct ad5686_dev *dev); | Free the resources allocated by ad5686_init(). |
uint16_t ad5686_set_shift_reg(struct ad5686_dev *dev, uint8_t command, uint8_t address, uint16_t data); | Write to input register. |
void ad5686_write_register(struct ad5686_dev *dev, enum ad5686_dac_channels channel, uint16_t data); | Write to Input Register n (dependent on LDAC). |
void ad5686_update_register(struct ad5686_dev *dev, enum ad5686_dac_channels channel); | Update DAC Register n with contents of Input Register n |
void ad5686_write_update_register(struct ad5686_dev *dev, enum ad5686_dac_channels channel, uint16_t data); | Write to and update DAC channel n . |
uint16_t ad5686_read_back_register(struct ad5686_dev *dev, enum ad5686_dac_channels channel); | Read back Input Register n. |
void ad5686_power_mode(struct ad5686_dev *dev, enum ad5686_dac_channels channel, uint8_t mode); | Power down the selected channels. |
void ad5686_ldac_mask(struct ad5686_dev *dev, enum ad5686_dac_channels channel, uint8_t enable); | Set up LDAC mask register. |
void ad5686_software_reset(struct ad5686_dev *dev); | Software reset (power-on reset) |
void ad5686_internal_reference(struct ad5686_dev *dev, uint8_t value); | Write to Internal reference setup register |
void ad5686_daisy_chain_en(struct ad5686_dev *dev, uint8_t value); | Set up DCEN register (daisy-chain enable) |
void ad5686_read_back_en(struct ad5686_dev *dev, uint8_t value); | Set up readback register (readback enable) |
int32_t ad5686_gain_mode(struct ad5686_dev *dev, uint8_t value); | Set gain mode (AD5683 family specific) |
Types Declarations
enum ad5686_type { ID_AD5671R, ID_AD5672R, ID_AD5673R, ID_AD5674R, ID_AD5675R, ID_AD5676, ID_AD5676R, ID_AD5677R, ID_AD5679R, ID_AD5686, ID_AD5684R, ID_AD5685R, ID_AD5686R, ID_AD5694, ID_AD5694R, ID_AD5695R, ID_AD5696, ID_AD5696R, ID_AD5681R, ID_AD5682R, ID_AD5683R, ID_AD5683, ID_AD5691R, ID_AD5692R, ID_AD5693R, ID_AD5693 }; ? enum comm_type { SPI, I2C, }; ? enum ad5686_dac_channels { AD5686_CH_0 = 0, AD5686_CH_1, AD5686_CH_2, AD5686_CH_3, AD5686_CH_4, AD5686_CH_5, AD5686_CH_6, AD5686_CH_7, AD5686_CH_8, AD5686_CH_9, AD5686_CH_10, AD5686_CH_11, AD5686_CH_12, AD5686_CH_13, AD5686_CH_14, AD5686_CH_15, }; ? struct ad5686_chip_info { uint8_t resolution; uint8_t register_map; enum comm_type communication; const uint32_t *channel_addr; }; ? struct ad5686_dev { /* I2C */ i2c_desc *i2c_desc; /* SPI */ spi_desc *spi_desc; /* GPIO */ gpio_desc *gpio_reset; gpio_desc *gpio_ldac; /* Device Settings */ enum ad5686_type act_device; uint32_t power_down_mask; uint32_t ldac_mask; }; ? struct ad5686_init_param { /* I2C */ i2c_init_param i2c_init; /* SPI */ spi_init_param spi_init; /* GPIO */ int8_t gpio_reset; int8_t gpio_ldac; /* Device Settings */ enum ad5686_type act_device; }; |
Downloads
- AD5449-微控制器無操作系統驅動程序
- AD7291-微控制器無操作系統驅動程序
- AD5790-微控制器無操作系統驅動程序
- AD5754R-微控制器無操作系統驅動程序
- AD5684R-微控制器無操作系統驅動程序
- AD5162-微控制器無操作系統驅動程序
- AD7091R-適用于單片機平臺的無操作系統驅動程序
- AD7091R-用于瑞薩微控制器平臺的無操作系統驅動程序
- AD5669R-微控制器無操作系統驅動程序
- AD7298-微控制器無操作系統驅動程序
- AD7780-適用于單片機平臺的無操作系統驅動程序
- AD5629R-微控制器無操作系統驅動程序
- AD5252-微控制器無操作系統驅動程序
- AD7799-微控制器無操作系統驅動程序
- AD5677R NanDAC+IIO Linux驅動程序
- 怎么編寫Framebuffer驅動程序 403次閱讀
- 深度解析全球操作系統格局 676次閱讀
- 什么是實時操作系統(RTOS) 4349次閱讀
- Windows文件系統過濾驅動程序介紹 1242次閱讀
- 了解和使用無操作系統和平臺驅動程序 1066次閱讀
- 嵌入式Linux內核的驅動程序開發是怎樣的 1415次閱讀
- 驅動的概念和分類及安全性 3940次閱讀
- 淺談電腦驅動程序的工作原理 詳解電腦驅動程序意義 2.9w次閱讀
- 基于嵌入式Linux內核的系統設備驅動程序開發設計 1113次閱讀
- 基于Linux2.6.30開發DS18B20的驅動程序的類型和文件操作接口函數詳解 1377次閱讀
- 嵌入式操作系統是什么_嵌入式操作系統有哪些 2w次閱讀
- 8255A驅動程序 3193次閱讀
- 8155驅動程序 3057次閱讀
- Xilinx設備的驅動程序 7967次閱讀
- PCI驅動程序開發實例 6702次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多