資料介紹

Table of Contents
Mbed: User Guide for SDP-K1
Introduction
The SDP-K1 (EVAL-SDP-CK1Z board) is one of Analog Devices' Mbed enabled boards. Based on an STM32F469NI microcontroller, it allows users to easily develop drivers and example code for Analog Devices products and evaluation boards. The CMSIS-DAP hardware circuit and DAPLink firmware in the Freescale processor, allows SDP-K1 board to be easily programmed and debugged. The board has an Arduino header and 120-pin SDP connector making it compatible with many Analog Devices evaluation boards.?
Mbed is used by Analog Devices to develop and distribute drivers for Analog ICs. Mbed is an online IDE developed by ARM. It is?open-source and?supports controller boards with Cortex ARM core processors. These controller boards are developed by various companies including Analog Devices, ST Microcontroller, NXP, Renesas etc. Mbed allows for development using:
- Desktop IDE (recommended): https://os.mbed.com/studio/
- Command line tool: https://os.mbed.com/docs/mbed-os/v6.6/quick-start/build-with-mbed-cli.html.
The platform is available at no cost for customers and is easy to use. A major advantage to Mbed is that the example programs can be run on other Mbed enabled boards that customers are familiar with as long as it meets the hardware setup requirements. This allows for the evaluation of parts regardless of the controller board available.
SDP-K1 Board Features
- Arduino Uno headers
- 120-pin SDP connector
- High performance ARM? Cortex?-M4 Core (STM32F469NI)
- 180 MHz max CPU frequency, 384 KB SRAM, 2048 KB Flash
- 1.8V or 3.3V selectable IO voltage
- 480Mbps High-Speed USB 2.0 with USB-C connector (Device)
- 45MHz SPI at 3.3V & 22.5MHz at 1.8V
- 400KHz I2C
- Timers / PWM
- 12-bit ADC
- GPIO
- 16MB SDRAM
- 3 traffic light LEDS (green, orange, red)
- 1 status LED
Board Components
Quick Start Guide
Each product with Mbed support comes with:
- Library files or drivers for the product and,
- A top level example program that provides a text based menu driven interface that demonstrates the library functions.
All the code files will be shared on the code tab of Analog Devices Mbed web page https://os.mbed.com/teams/AnalogDevices/code/. Each project comes with a README.txt that explains how to use the code. This document is a user guide on how to use the code to evaluate products supported with Mbed code. It explains in more detail, the Mbed setup instructions written in the README.txt. The hardware setup instructions depends on the product and evaluation board used and will be explained in the README.txt.
Mbed Setup
- Go to?Mbed web page?https://www.mbed.com?and click Log in/sign Up button on top right.?Create an Mbed account or log in. Please note the username you are using.?Open the online compiler by clicking the yellow button on the top right. This is what the compiler will look like:
- Add SDP-K1 board to your compiler by?going to?https://os.mbed.com/platforms/SDP_K1/?and click on?Add to your Mbed Compiler?button on the bottom right.?
Running Code on Mbed
- Click Compile. This should download a binary file, ?program_name?.SDP_K1.bin. Find the file in your Downloads folder.
- To program the SDP-K1 board, connect the SDP-K1 board to your computer using the USB cable provided. You should see the board as a new drive on your computer.?Copy the binary file into the Mbed enabled board drive. You can also drag and drop the file, like a USB stick.??
- Connect the evaluation board and follow the demo manual for the evaluation board to set up the board as required.
- To communicate with the board, use your favorite Terminal program, like?Putty,?Tera Term?etc. To use Putty, download and install Putty from?here. Here are some?installation instructions.?Open Putty and select Serial connection type. Enter the serial port number and baud rate. Click Open.
NOTE: You can find the serial port (which constantly changes, every time you plug a device in), by checking device manager.
Useful Links
For further information on Mbed, developing and running code, and the SDP-K1 controller board, consult the following:
Mbed documentation: https://os.mbed.com/docs/mbed-os/v6.5/introduction/index.html
SDP-K1 Mbed page (includes pinouts and more detailed description of using the SDP-K1 in Mbed): https://os.mbed.com/platforms/SDP_K1/
Mbed supported ADI parts: https://wiki.analog.com/resources/tools-software/mbed-list
Purchase SDP-K1: http://www.analog.com/SDP-K1
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
- BOOSTXL-K350QVG-S1 QVGA显示BoosterPack™插件模块用户指南0次下载
- SDP-H1用户指南12次下载
- Ei3 SDP转接板用户指南5次下载
- UG-1539:EVAL-SDP-CK1Z用户指南0次下载
- SDP-K1 BOM表5次下载
- SDP-K1原理图5次下载
- SDP-K1 BOM表6次下载
- SDP-K1原理图9次下载
- SDP-K1 BOM5次下载
- SDP-K1 Schematic0次下载
- SDP-K1 BOM8次下载
- SDP-K1 Schematic4次下载
- PSMC设计器用户指南及技巧4次下载
- K-Flash在线编程软件用户使用指南0次下载
- AstroII-EVB-F1K(A)-L144开发板用户指南33次下载
- k8s权限管理指南说明122次阅读
- 产品使用 | 龙芯2K0300 TF卡启动与系统更新指南258次阅读
- SDP810传感器专题之电气集成和结构集成(三)260次阅读
- SDP810传感器信号补偿专题之高度修正(二)170次阅读
- SDP810传感器信号补偿专题之温度补偿(一)181次阅读
- 龙芯2K0300蜂鸟板快速上手指南227次阅读
- 答疑解惑 | 工程师必备!PE1光纤放大器使用指南948次阅读
- Mbed OS适配极海APM32F407IG TinyBoard的简要介绍782次阅读
- UART串口端为何串联1k电阻19411次阅读
- 可靠的长线1-Wire网络指南2454次阅读
- 基于MAXREFDES220的心率和 SpO2 血氧传感器的医疗监测电路设计3674次阅读
- 朗锐智科Nvidia K1安卓主板介绍2895次阅读
- TDP、TBP、SDP和ACP的区别13949次阅读
- ARM公司低调升级Mbed_为物联网应用做准备3248次阅读
- mbed软件开发平台入门学习基础13306次阅读
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論