色哟哟视频在线观看-色哟哟视频在线-色哟哟欧美15最新在线-色哟哟免费在线观看-国产l精品国产亚洲区在线观看-国产l精品国产亚洲区久久

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>類型>參考設計>CN-0272軟件用戶指南

CN-0272軟件用戶指南

2021-03-23 | pdf | 918.24KB | 次下載 | 2積分

資料介紹

This version (03 Jan 2021 21:59) was approved by Robin Getz.The Previously approved version (23 Jun 2014 16:22) is available.Diff

CN-0272 Software User Guide

Overview

CN-0272 is a high-speed photodiode signal conditioning circuit with dark current compensation. The system converts current from a high-speed silicon PIN photodiode and drives the inputs of a 20 MSPS ADC. This combination of parts offers spectral sensitivity from 400 nm to 1050 nm with 49 nA of photocurrent sensitivity, a dynamic range of 91 dB and 2 MHz of bandwidth. The signal conditioning circuitry of the system consumes only 40 mA of current from the ±5 V supplies making this configuration suitable for portable high-speed high-resolution light intensity applications such as pulse oximetry.

Other suitable applications for this circuit would be as an analog opto-isolator. It can also be adapted to applications that require larger bandwidth and less resolution such as adaptive speed control systems.

This user guide will discuss how to use the evaluation software to collect data from the EVAL-CN0272-SDPZ Daughter Board

Required Equipment

  • EVAL-SDP-CB1Z Evaluation Board (SDP-B Board)
  • EVAL-CN0272-SDPZ Daughter Board (CN0272 Board)
  • EVAL-CFTL-6V-PWRZ Power Supply or equivalent +6V power supply
    • (supplied with provided CD in kit)
  • PC with the following Minimum Requirements
    • Windows XP Service Pack 2 (32-bit)
    • USB type A Port
    • Processor rated at 1GHz or faster
    • 512 MB RAM and 500 MB available hard disk space
  • USB type A to USB type mini-B cable
  • Light source between 400nm to 1050nm (not included in kit)
  • SMB Connector (not required)
    • This is needed if an external voltage bias for the photodiode is to be used

General Setup


Installing the Software

  1. Extract the file CN0272 SDP Eval Software.zip and open the file setup.exe.

    NOTE: It is recommended that you install the CN0272 SDP Evaluation Software to the default directory path C:/Program Files/Analog Devices/CN0272/ and all National Instruments products to C:/Program Files/National Instruments/






  2. Click Next to view the installation review page



  3. Click Next to start the installation



  4. Upon completion of the installation of the CN0272 SDP Eval Software, the installer for the ADI SDP Drivers will execute.

    NOTE: It is recommended that you close all other applications before clicking “Next”. This will make it possible to update relevant system files without having to reboot your computer.





  5. Press “Next” to set the installation location for the SDP Drivers.

    It is recommended that you install the drivers to the default directory path
    C:/Program Files/Analog Devices/SDP/Drivers



  6. Press “Next” to install the SDP Drivers and complete the installation of all software. Click “Finish” when done.


Connecting the Hardware

  1. Connect J4 of the EVAL-CN0272-SDPZ (CN0272 Board) to CON A of the EVAL-SDP-CB1Z (SDP-B Board)



  2. Select the voltage bias of the photodiode.
    1. Select the onboard -5V bias by populating JP1 with a shorting jumper as depicted below



    2. Select an external voltage bias by populatign JP1 with a shorting jumper as depicted below.

      NOTE: When using an external voltage to bias the photodiode, a SMB connector also must be connected to J2. The other end of this cable must connect to a voltage supply ≤ 15V.





  3. Connect a 6V supply to the Barrel Jack or the Screw Terminal on the CN0272 Board



  4. Connect the USB Cable to the SDP-B Board and the PC




Using the Evaluation Software

Software Control and Indicator Descriptions

  1. SDP Connector Dropdown Menu
    • This control will select which connector (on the SDP-B Board) the CN0272 Board is currently connected to. The options are “connectorA” or “connectorB”. The connector to be used must be selected before clicking the Connect to SDP-B Board Button
  2. Connect to SDP-B Board Button
    • When this button is pressed, the SDP-B Board makes a USB connection to the CN0272 Board. A connection to the SDP-B Board must be made to use the software. This button is also used in conjunction with the SDP Connector Dropdown Menu.
  3. Take Snapshot(s) Button
    • When this button is pressed, the SDP-B Board will collect a single Snapshot or a collection of Snapshots depending on the Acquisition Mode setting.

      Snapshot - a collection of analog to digital conversions, sampled at 20MSPS, acquired by the SDP-B Board and displayed in the graph.







  4. Save Snapshot(s) Button
    • When this button is pressed, the software will save a single Snapshot or a collection of Snapshots to a tab delimited ASCII spreadsheet file.
  5. Acquisition Mode Radio Buttons
    • Single Snapshot - When the software is in this mode, the SDP-B Board will collect a single Snapshot of data.
    • Multiple Snapshots - When the software is in this mode, the SDP-B Board will collect multiple Snapshots of data.
  6. Conversions in Snapshot Numerical Control
    • This control determines the number of conversions in a single Snapshot of data.
    • The minimum value is 1 and the maximum value is 65,536.
  7. Snapshots to Take Numerical Control
    • This control determines the number of Snapshots of data the SDP-B Board collects.
    • The minimum value is 1 and the maximum is 65,536
    • This control is only enabled in Multiple Snapshots Acquisition Mode.
  8. Snapshot Delay (ms) Numerical Control
    • This control determines the delay (in milliseconds) between Snapshots.
    • The minimum value is 1 and the maximum value is 65,536
    • This control is only enabled in Multiple Snapshots Acquisition Mode.
  9. Control Tabs
    • Photocurrent Results - Clicking this tab brings the Photocurrent Results graph to the front
    • Histogram Results - Clicking this tab brings the Histogram Results graph to the front
    • Configure - Clicking this tab brings the System Settings to the front
  10. Graph Controls
    • These controls allow the user to zoom-in, zoom-out, and pan through the Snapshot displayed.
  11. Graph Units Radio Buttons
    • This control determines the Y-Axis units of the “Snapshot” displayed in the graph.
  12. Snapshot Displayed Numerical Control/Indicator
    • This control determines the current Snapshot to display in the graph. When the value is changed, the graph is updated with the Snapshot specified.
    • This control also acts as an indicator of the current Snapshot displayed in the graph. For example, when the software is in the process of collecting multiple Snapshots, the indicator is incremented as the Snapshots are collected.
    • This control/indicator is only enabled in Multiple Snapshots Acquisition Mode.
  13. System Status String Indicator
    • This indicator displays a message to the user detailing the current state of the software.
  14. System Status LED Indicator
    • This indicator displays the current state of the software in the form of an LED. There are four status LED colors.
      Inactive
      Busy
      ADC in Power-Down
      Error

  1. Follow the instructions to properly install the software and connect the hardware as described in the previous sections.
  2. Open the file named CN0272.exe in the installation directory.

    NOTE: If the software was installed to the default location it will be found at
    C:/Program Files/Analog Devices/CN0272/CN0272.exe







  3. Select the connector to use from the SDP Connector Dropdown Menu.
  4. Click the Connect to SDP-B Board Button. A window with a progress bar will load.



  5. Upon success, the System Status String Indicator will display SDP-B Ready to Take Snapshot(s)

Capturing a Single Snapshot

  1. Establish a USB Connection Link.
  2. Select Single Snapshot as the Acquisition Mode
  3. Set the number of conversions in the snapshot
  4. Click the Take Snapshot(s) Button

Capturing Multiple Snapshots

  1. Establish a USB Connection Link.
  2. Select Multiple Snapshots as the Acquisition Mode.
  3. Set the number of conversions in each snapshot.
  4. Set the number of snapshots to take.
  5. Set the snapshot delay.
  6. Click the Take Snapshot(s) Button.

Displaying a Specific Snapshot

  1. Establish a USB Connection Link.
  2. Select Multiple Snapshots as the Acquisition Mode.
  3. Set the number of conversions in each snapshot.
  4. Set the number of snapshots to take.
  5. Set the snapshot delay.
  6. Click the Take Snapshot(s) Button.
  7. Type the number of the snapshot of interest into the Snapshot Displayed Numerical Control

Saving a Single Snapshot to a Spreadsheet File

  1. Establish a USB Connection Link.
  2. Capture a Single Snapshot.
  3. Click the Save Snapshot(s) Button.
  4. Select either Microamps (μA) or ADC Codes.



  5. Click the OK Button.
  6. Browse to the directory location where the spreadsheet file is to be saved.
  7. Name the file.
  8. Click the OK Button.


    The software saves the spreadsheet file as ASCII text with columns separated by tabs.

Saving Multiple Snapshots to a Spreadsheet File

  1. Establish a USB Connection Link.
  2. Capture Multiple Snapshots.
  3. Click the Save Snapshot(s) Button.
  4. Select either All Snapshots or Range of Snapshot(s).
    • If Range of Snapshot(s) is selected, input the subset of snapshots to be saved.
  5. Select either Microamps (μA) or ADC Codes.



  6. Click the OK button.
  7. Browse to the directory location where the spreadsheet file is to be saved.
  8. Name the file.
  9. Click the OK Button.


    The software saves the spreadsheet file as ASCII text with columns separated by tabs.

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
主站蜘蛛池模板: 被黑人掹躁10次高潮| 韩国无遮羞禁动漫在线观看| 九九精品国产亚洲A片无码| 日韩精品人成在线播放| 又紧又大又爽精品一区二区 | 热九九99香蕉精品品| 伊人久久大香网| 国产免费福利在线视频| 欧美巨大xxxx做受高清| 伊人久久国产免费观看视频| 国产精品爽爽久久久久久无码 | 亚洲最大成人| 国产精品成人久久久久A伋| 欧美日韩中文在线字幕视频| 永久免费在线观看视频| 国产偷抇久久精品A片蜜臀AV| 人妻熟妇乱又伦精品视频中文字幕| 在线A亚洲老鸭窝天堂AV高清| 国产又湿又黄又硬又刺激视频| 色偷偷网址| 拔萝卜视频免费看高清| 免费国产久久拍久久爱| 在线播放成人无码日| 含羞草传媒在线观看| 无码专区aaaaaa免费视频| 陈红下面又紧又小好爽| 欧美.亚洲.日韩.天堂| 7756短视频| 久久人妻无码毛片A片麻豆| 亚洲人成伊人成综合网久久久| 国产精品99久久久久久人韩国| 让人爽到湿的小黄书| yellow日本动漫免费观看| 欧美5g影院天天爽天天看| 3D漫画H精品啪啪无码| 开心色99xxxx开心色| 在线毛片片免费观看| 久久国产精品高清一区二区三区 | 2012中文字幕在线动漫电影| 久久亚洲精品永久网站| 伊人yinren6综合网色狠狠 |