色哟哟视频在线观看-色哟哟视频在线-色哟哟欧美15最新在线-色哟哟免费在线观看-国产l精品国产亚洲区在线观看-国产l精品国产亚洲区久久

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>類型>參考設計>CN-0354軟件用戶指南

CN-0354軟件用戶指南

2021-04-09 | pdf | 711.97KB | 次下載 | 2積分

資料介紹

This version (25 Jan 2021 11:09) was approved by Ioana Chelaru.The Previously approved version (06 Jan 2021 08:30) is available.Diff

CN-0354 Software User Guide

Overview

CN-0354 is a flexible, 4-channel, low power thermocouple measurement circuit with an overall power consumption of less than 8 mW. The circuit has a multiplexed front end, followed by an instrumentation amplifier that performs cold junction compensation (0°C to 50°C) and converts the thermocouple output to a voltage with a precise scale factor of 5 mV/°C. The error is less than 2°C, over a measurement range of ?25°C to +400°C, and is primarily due to the thermocouple nonlinearity. A nonlinearity correction algorithim reduces the error to less than 0.5°C over a 900°C measurement range. Noise free resolution is less than 0.1°C. The signal is then digitized by a 24-bit Σ-Δ ADC, and the digital value is provided on an I2C serial interface. With the PMOD form factor for rapid prototyping, the design requires minimal PC board area and is ideal for applications that require precise thermocouple temperature measurements.

The four thermocouple inputs to the circuit are terminated at the isothermal block, P2. The ADG1609 CMOS multiplexer switches the four thermocouple channels to a single signal conditioning block to handle four thermocouple inputs.

The signal is amplified by the AD8495, a precision instrumentation amplifier that is laser trimmed to provide a precise 5°mV/°C output for a K type thermocouple. The AD8495 also provides cold junction compensation over a range of 0°C to 50°C.

The fifth thermocouple is added to cancel the voltage generated by any temperature differential that exists between the isothermal block and the AD8495 cold junction compensation circuit.

TheAD7787is a 24-bit, low noise, low power Σ-Δ ADC for low frequency measurement applications, such as thermocouple measurement systems. Its internal clock eliminates the need of an external clock to the device and makes the output data rate user configurable. This can reduce current consumption because it functions at a lower internal clock frequency. It contains a Σ-Δ ADC with one differential input and one single-ended input, either of which can be buffered or unbuffered after passing through a multiplexer.

Required Equipment

  • EVAL-SDP-CB1Z Controller Board (SDP-B Board)
  • SDP-I-PMOD Interposer Board (SDP-PMOD Interposer Board)
  • EVAL-CN0354-PMDZ Evaluation Board (CN-0354 Board)
  • EVAL-CFTL-6V-PWRZ +6V Power Supply or equivalent DC Power Supply
  • PC with the following minimum requirements
    • Windows XP Service Pack 2 (32-bit)
    • USB Type-A Port
    • Processor rated at 1GHz or faster
    • 512 MB RAM and 500 MB available hard disk space
  • USB Type-A to USB Mini-B cable
  • K-Type Thermocouple millivolt source
  • K-Type Thermocouple wire

General Setup

  • The EVAL-CN0354-PMDZ (CN-0354 Board) connects to the SDP-I-PMOD Interposer Board (SDP-PMOD Interposer Board) via the 120-pin connector at J3 and is connected to the EVAL-SDP-CB1Z (SDP-B Board) via the 120-Pin connector at J4.
  • The EVAL-CFTL-6V-PWRZ +6V power supply powers the EVAL-CN0354-PMDZ (CN-0354 Board) via the DC Barrel Jack of the SDP-I-PMOD Interposer Board (SDP-PMOD Interposer Board) at J1.
  • The EVAL-SDP-CB1Z (SDP-B Board) connects to the PC via the USB cable.
  • The reference thermocouple connects to the EVAL-CN0354-PMDZ (CN-0354 Board) via the thermocouple connector at +TREF- and the tip of the thermocouple must be placed as close to U4 as possible.
  • The thermocouples may be placed at any of the four channels of P2.

    NOTE: If not all four thermocouple channels will be used, it is recommended to short out the positive and negative terminal of any unused channel at the isothermal block P2 in order to avoid the AD8495 from railing.







Installing the Software

  1. Extract the file CN0354 SDP Eval Software.zip and open the file setup.exe.

    NOTE: It is recommended that you install the CN-0354 Evaluation Software to the default directory path C:/Program Files/Analog Devices/CN0354/ and all National Instruments products to C:/Program Files/National Instruments/





  2. Click Next to view the installation review page



  3. Click Next to start the installation



  4. Upon completion of the installation of the CN-0354 Evaluation Software, the installer for the ADI SDP Drivers will execute.

    NOTE: It is recommended that you close all other applications before clicking “Next”. This will make it possible to update relevant system files without having to reboot your computer.





  5. Press “Next” to set the installation location for the SDP Drivers.

    It is recommended that you install the drivers to the default directory path
    C:/Program Files/Analog Devices/SDP/Drivers



  6. Press “Next” to install the SDP Drivers and complete the installation of all software. Click “Finish” when done.

Using the Evaluation Software


Software Control and Indicator Descriptions

  1. Start Sampling
    • When this button is pressed, the SDP-B Board makes a USB connection to the CN-0354 Board automatically. A connection to the SDP-B Board must be made to use the software. Once a USB connection is established, the software starts sampling in real-time.
  2. Configure System
    • When this button is pressed, the system is configured based on the preferences in the System Configuration tab


      NOTE: Default values are provided in the System Configuration tab in order for the software to run even without specified preferences are inputted.


  3. Save Data
    • When this button is pressed, the software will save the data collected to a tab delimited ASCII spreadsheet file.
  4. Control Tabs
    • Start Sampling - Clicking this tab brings the data collection chart to the front.
    • Configure System - Clicking this tab brings the system configuration settings to the front.
    • SDP Board Information - Clicking this tab brings the SDP Board revision information to the front.
  5. Thermocouple Channels temperature numerical indicator
    • This indicator displays the current temperature measurement in each active channel in degrees Celsius.
  6. Channel Select checkboxes
    • These checkboxes allow for the setting of the active thermocouple channels.
  7. Chart Controls
    • These controls allow the user to zoom-in, zoom-out, and pan through the data collected.
  8. System Status String and LED Indicators
    • This indicator displays the current state of the software in the form of an LED. There are three status LED colors.
      Inactive
      Busy
      Error


  9. Temperature Range Dropdown Select
    • This control is used to change the temperature range of the system. The default value is 5'C to 880'C.
  10. Header setting Tab Display
    • The tab shows the proper P1 header setting. The red box indicates where the shunt should be placed.

      Everytime the temperature range is changed in the software, a corresponding change should be done in the hardware setting as well. Specifically, the P1 header should have the correct setting as showed in the display tab of the Adjust Temperature Range section of the System Configuration Tab.

  11. Low Calibration Temperature Numerical Control
    • This control is used to modify the low calibration temperature setpoint. The greyed out value on the right is the millivolt equivalent of the specified temperature based on the NIST Table for Type K thermocouple.
    • The default value is 5°C.
  12. High Calibration Temperature Numerical Control
    • This control is used to modify the high calibration temperature setpoint. The greyed out value on the right is the millivolt equivalent of the specified temperature based on the NIST Table for Type K thermocouple.
    • The default value is 880°C.
  13. Start Calibration
    • Pressing this button calibrates the system using the values populated in the calibration temperature numerical controls.
  14. Calibration Select Dropdown Menu
    • The dropdown menu specifies whether to Ignore Calibration where the software ignores the calibration factors derived from the calibaration routine, or to Use Calibration where the software factors in the calibration values in the temperature calculations.
  15. Update Rate Radio Buttons
    • This control is used to change the output word rate of the AD7787. The default value is 16 Hz and is highlighted in bold on the Configure System Tab.
  16. Buffer Select Radio Buttons
    • This control is used to set the mode of the AD7787. The default value is Unbuffered Mode and is highlighted in bold on the Configure System Tab.
      • Buffered Mode - Selecting this mode turns the on-chip analog input channel buffer of the AD7787 ON.
      • Unbuffered Mode - Selecting this radio button turns the on-chip analog input channel buffer of the AD7787 OFF.
  17. Burnout Current Radio Buttons
    • When this control is enabled the 100nA current sources in the signal path are enabled.

      The burnout currents can be enabled only when the buffer is active.

Saving Data to a Spreadsheet File


  1. Establish a USB Connection Link.
  2. Start Sampling.
  3. Click the Save Data Button.
  4. The software automatically opens the Excel spreadsheet file with the data.


The data is exported to an Excel spreadsheet file with columns labeled accordingly.

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
主站蜘蛛池模板: 性生交片免费无码看人| 国产精一品亚洲二区在线播放| 亚洲理论在线a中文字幕| 欧美人与善交大片| 九九99热久久精品在线6| 北条麻妃快播| 伊人精品久久久大香线蕉99| 色AV色婷婷97人妻久久久| 老师的玉足高跟鞋满足我| 国产亚洲综合视频| 二色AV天堂在线| 9亚洲欧洲免费无码在线| 影音先锋亚洲AV少妇熟女| 午夜勾魂曲| 色妹子综合| 日本另类xxxx| 欧美日韩精品一区二区三区四区| 日本伦理片 中文字幕| 成人性生交大片免费看金瓶七仙女| 伊人大香人妻在线播放| 夜色资源站国产www在线视频| 色色色999| 日本不卡免免费观看| 欧美高清vivoesosexo10| 久久亚洲国产中文字幕| 久见久热 这里只有精品| 韩国演艺圈qvod| 国精产品一区一区三区有限在线| 国产精品99精品无码视亚| 俄罗斯6一12呦女精品| 成年人视频在线观看免费| www.精品视频| WRITEAS检查身体| ae58老司机福利| wwww69| 纯h超级大尺度小黄文| 波多野结衣二区| 岛国精品在线观看| 国产成人精品自拍| 国产手机在线视频| 精品视频在线播放|