資料介紹
Table of Contents
AD5757 FMC-SDP Interposer & Evaluation Board / Xilinx KC705 Reference Design
Supported Devices
Evaluation Boards
Overview
This document presents the steps to setup an environment for using the EVAL-AD5757SDZ evaluation board together with the Xilinx KC705 FPGA board and the Xilinx Embedded Development Kit (EDK). Below is presented a picture of the EVAL-AD5757SDZ Evaluation Board with the Xilinx KC705 board.
For component evaluation and performance purposes, as opposed to quick prototyping, the user is directed to use the part evaluation setup. This consists of:
- 1. A controller board like the SDP-B ( EVAL-SDP-CS1Z)
- 2. The component SDP compatible product evaluation board
- 3. Corresponding PC software ( shipped with the product evaluation board)
The SDP-B controller board is part of Analog Devices System Demonstration Platform (SDP). It provides a high speed USB 2.0 connection from the PC to the component evaluation board. The PC runs the evaluation software. Each evaluation board, which is an SDP compatible daughter board, includes the necessary installation file required for performance testing.
Note: it is expected that the analog performance on the two platforms may differ.
Below is presented a picture of SDP-B Controller Board with the EVAL-AD5757SDZ Evaluation Board.
The AD5757 is a quad, current output DAC that operates with a power supply range from 10.8 V to 33 V. On-chip dynamic power control minimizes package power dissipation by regulating the voltage on the output driver from 7.4 V to 29.5 V using a dc-to-dc boost converter optimized for minimum on-chip power dissipation. Each channel has a corresponding CHART pin so that HART signals can be coupled onto the current output of the AD5757.
The EVAL-AD5757SDZ evaluation board is designed to help customers quickly prototype new AD5757 circuits and reduce design time. To power the AD5757SDZ evaluation board supply 15V between the AVSS (0V) and AVDD (+15V) inputs for the analog supply and 5V between PGND(0V) and AVCC(+5V) as DC-to-DC supply voltage.
More information
- AD5757 Product Info - pricing, samples, datasheet
Getting Started
The first objective is to ensure that you have all of the items needed and to install the software tools so that you are ready to create and run the evaluation project.
Required Hardware
- FMC-SDP adapter board
- EVAL-AD5757SDZ evaluation board
Required Software
Downloads
- Xilinx Boards Common Drivers: https://github.com/analogdevicesinc/no-OS/tree/master/platform_drivers/Xilinx/SDP_Common
- EDK KC705 Reference project: https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_sdp_kc705
Hardware setup
Before connecting the ADI evaluation board to the Xilinx KC705 make sure that the VADJ_FPGA voltage of the KC705 is set to 3.3V. For more details on how to change the setting for VADJ_FPGA visit the Xilinx KC705 product page.
- Use the FMC-SDP interposer to connect the ADI evaluation board to the Xilinx KC705 board on the FMC LPC connector.
- Connect the JTAG and UART cables to the KC705 and power up the FPGA board.
To power on the EVAL-AD5757 evaluation board, you need to provide an external +15V AVdd and -15V AVss analog supply voltage and a +5V AVcc DC-to-DC supply voltage, which will supplies all four on-board dc-to-dc blocks and may draw as much as 0.8 A peak current per channel (for more information see: EVAL-AD5757SDZ evaluation board user guide).
Reference Project Overview
The following commands were implemented in this version of EVAL-AD5757 reference project for Xilinx KC705 FPGA board.
Command | Description |
---|---|
help? | Displays all available commands. |
register= | Writes to the a data register. Accepted values: Register address: 0 - DAC Data Reg 2 - Gain Register 3 - Gain Register All DACs 4 - Offset Register 5 - Offset Register All DACs 6 - Clear Code Register 7 - Control Register Channel: 0 .. 3 - channel A .. D. Value: 0 .. 65535 - the value written to the DAC. |
control= | Writes to the a control register. Accepted values: Register address: 0 - Slew Rate Register 1 - Main Control Register 2 - DAC Control Register 3 - Dc-to-dc Control Register 4 - Software Register Channel: 0 .. 3 - channel A .. D. Value: 0 .. 65535 - the value written to the DAC. |
register? | Read back the value of a specified register. Accepted values: Register address : 0x00 .. 0x1A. |
power= | Set the power state of the dc-to-dc converters, DAC and internal amplifiers for the selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. Value: 0 - turn off; 1 - turn on. |
power? | Displays the power state of the dc-to-dc converters,DAC and internal amplifiers for the selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. |
range= | Set the range of the selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. Range: 0 - 0 V to 5 V voltage 1 - 0 V to 10 V voltage 2 - -5 V to +5 V voltage 3 - -10 V to +10 V voltage 4 - 4 mA to 20 mA current 5 - 0 mA to 20 mA current 6 - 0 mA to 24 mA current |
range? | Displays the range of the selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. |
voltage= | Sets the output voltage for a selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. Desired voltage(unit in V) multiplied by 1000 |
voltage? | Displays the output voltage for a selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. |
current= | Displays the output current for a selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. Desired current (unit in mA) multiplied by 1000 |
current? | Displays the output current for a selected channel. Accepted values: Channel: 0 .. 3 - channel A .. D. |
getStatus! | Read back the Status register and print any faults or errors. |
testSPI! | Ensure that the SPI interface are working correctly. |
Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA.
The following image shows a generic list of commands in a serial terminal connected to Xilinx KC705 FPGA's UART peripheral.
Software Project Setup
The hardware platform for each reference projects with FMC-SDP interposer and KC705 evaluation board is common. The next steps should be followed to recreate the software project of the reference design:
- First download the KC705 Reference project from Github on your computer. You can do this by clonning this repository: https://github.com/analogdevicesinc/fpgahdl_xilinx.
- From this entire repository you will use cf_sdp_kc705 folder. This is common for all KC705 projects.
- Open the Xilinx SDK. When the SDK starts, it asks you to provide a folder where to store the workspace. Any folder can be provided. Make sure that the path where it is located does not contain any spaces.
- In the SDK select the File→Import menu option to import the software projects into the workspace.
- In the Import window select the General→Existing Projects into Workspace option.
- In the Import Projects window select the cf_sdp_kc705 folder as root directory and check the Copy projects into workspace option. After the root directory is chosen the projects that reside in that directory will appear in the Projects list. Press Finish to finalize the import process.
- The Project Explorer window now shows the projects that exist in the workspace without software files.
- Now the software must be added in your project. For downloading the software, you must use 3 links from Github given in Downloads section. From there you'll download the specific driver, the specific commands and the Xilinx Boards Common Drivers(which are commons for all Xilinx boards). All the software files downloaded must be copied in src folder from sw folder.
- Before compilation in the file called Communication.h you have to uncomment the name of the device that you currently use. In the picture below there is an example of this, which works only with AD5629R project. For another device, uncomment only the respective name. You can have one driver working on multiple devices, so the drivers's name and the uncommented name may not be the same for every project.
- The SDK should automatically build the project and the Console window will display the result of the build. If the build is not done automatically, select the Project→Build Automatically menu option.
- If the project was built without any errors, you can program the FPGA and run the software application.
More information
- Example questions:
- An error occurred while fetching this feed: http://ez.analog.com/community/feeds/allcontent/atom?community=2061
- AD7656-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7658-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD9833 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5780 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5684R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5449 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- CN0204 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- CN0271 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7980 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD9838 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7988-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5443 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7298 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5272 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7683 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- 使用Xilinx FPGA實現OFDM系統 850次閱讀
- 系統演示平臺簡化了從評估到原型設計的過渡 646次閱讀
- Xilinx FPGA的FMC介紹 5643次閱讀
- dfrobot可插拔傳感器轉接器簡介 1043次閱讀
- dfrobotWiiChuck轉接器簡介 1104次閱讀
- 飛凌嵌入式JTAG轉接板?介紹 1614次閱讀
- digilent FMC Pcam適配器介紹 2731次閱讀
- digilent FMC-HDMI:雙HDMI輸入擴展子板介紹 4286次閱讀
- 天嵌科技LVDS轉接板-TTL-LVDS轉接板規格 3772次閱讀
- 2.5 GSPS高性能數模轉換器——AD9739A DAC 4675次閱讀
- 關于FPGA的FMC接口的詳細介紹 1.1w次閱讀
- 系統演示平臺便于快速進行原型制作與評估 1504次閱讀
- Maxim為三款Xilinx FPGA參考設計提供電源管理方案 1163次閱讀
- 非插入式器件如何測量? 1573次閱讀
- ADI實驗室電路:500V共模電壓電流監控器 2923次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多