AD7091R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
資料介紹
Table of Contents
AD7091R FMC-SDP Interposer & Evaluation Board / Xilinx AC701 Reference Design
Supported Devices
Evaluation Boards
Overview
This document presents the steps to setup an environment for using the EVAL-AD7091RSDZ evaluation board together with the Xilinx KC705 FPGA board and the Xilinx Embedded Development Kit (EDK). Below is presented a picture of the EVAL-AD7091RSDZ Evaluation Board with the Xilinx KC705 board.
For component evaluation and performance purposes, as opposed to quick prototyping, the user is directed to use the part evaluation setup. This consists of:
- 1. A controller board like the SDP-B ( EVAL-SDP-CS1Z)
- 2. The component SDP compatible product evaluation board
- 3. Corresponding PC software ( shipped with the product evaluation board)
The SDP-B controller board is part of Analog Devices System Demonstration Platform (SDP). It provides a high speed USB 2.0 connection from the PC to the component evaluation board. The PC runs the evaluation software. Each evaluation board, which is an SDP compatible daughter board, includes the necessary installation file required for performance testing.
Note: it is expected that the analog performance on the two platforms may differ.
Below is presented a picture of SDP-B Controller Board with the EVAL-AD7091RSDZ Evaluation Board.
The AD7091R is a 12-bit successive approximation analog-to-digital converter (ADC) that offers ultralow power consumption (typically 349 μA at 3 V and 1 MSPS) while achieving fast throughput rates (1 MSPS with a 50 MHz SCLK). Operating from a single 2.7 V to 5.25 V power supply, the part contains a wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 7 MHz. The AD7091R also features an on-chip conversion clock, accurate reference, and high speed serial interface.
The EVAL-AD7091RSDZ evaluation board is a member of a growing number of boards available for the SDP. They were designed to help customers evaluate performance or quickly prototype new AD7091R circuits and reduce design time.
More information
- AD7091R Product Info - pricing, samples, datasheet
Getting Started
The first objective is to ensure that you have all of the items needed and to install the software tools so that you are ready to create and run the evaluation project.
Required Hardware
- FMC-SDP adapter board
- EVAL-AD7091RSDZ evaluation board
Required Software
- Xilinx ISE 14.6
- A UART terminal (Tera Term/Hyperterminal/Termite), baud rate 115200.
Downloads
- EDK AC701 Reference project: https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_sdp_adc/cf_ad7091_ac701
- Platform specific files: https://github.com/analogdevicesinc/no-OS/tree/master/legacy/platform_drivers/Xilinx/SDP_Common
Run the Demonstration Project
Hardware Setup
Before connecting the ADI evaluation board to the Xilinx KC705 make sure that the VADJ_FPGA voltage of the KC705 is set to 3.3V. For more details on how to change the setting for VADJ_FPGA visit the Xilinx KC705 product page.
- Use the FMC-SDP interposer to connect the ADI evaluation board to the Xilinx KC705 board on the FMC LPC connector.
- Connect the JTAG and UART cables to the KC705 and power up the FPGA board.
- Power the ADI evaluation board.
- Start a UART terminal and set the baud rate to 115200 bps.
The next step is to setup the software project.
Software Project Setup
The next steps should be followed to recreate the software project of the reference design:
- First clone the AC701 Reference project for AD7091 and the ADI IP cores from Github to your computer, by using the following link: https://github.com/analogdevicesinc/fpgahdl_xilinx/
- Copy the folder ../fpgahdl_xilinx/cf_lib and ../fpgahdl_xilinx/cf_sdp_adc/cf_ad7091_ac701 to your working directory
- Open a Xilinx SDK and setup your workspace to %Working directory%/cf_ad7091_ac701/SDK/SDK_Workspace
- In the SDK select the File→Import menu option to import the software project into your workspace.
- In the Import window select the General→Existing Projects into Workspace option.
- In the Import Projects window select the %Working directory%/cf_ad7091_ac701/ folder as root directory and verify if all the three project (hw, bsp, sw) are checked.
- The Project Explorer window now shows the projects that exist in the workspace without software files.
- Now you have to add the source files to your project. You can download all the source files for the current reference project using the links from the Downloads section. List of source files for the current project is:
- Driver files : ad7091.h and ad7091.c
- Platform specific files : Communication.h, Communication.c, TIME.h and TIME.c
- ADC specific files : main.c and xdma_config.h
- All these files must be copied into the %Working directory%/cf_ad7091_ac701/SDK/SDK_Workspace/sw/src/ folder.
- The SDK should automatically build the project and the Console window will display the result of the build. If the build is not done automatically, select the Project→Build Automatically menu option.
- If the project was built without any errors, you need to download the data capture script, from here. Copy the Data_capture folder to your working directory.
- Run the data_capture.bat script. If the acquisition is finished with success, it should appear a file called Acquisition.csv with the result of the conversion.
- By default the length of a transaction is 16k samples. The input signal used in this reference design was a 10 Khz sine wave.
More information
- Example questions:
- An error occurred while fetching this feed: http://ez.analog.com/community/feeds/allcontent/atom?community=2061
- AD7656-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7658-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5669R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD9833 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5780 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5684R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5686R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5449 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- CN0204 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- CN0271 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7980 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7988-1 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5629R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD7683 FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- AD5694R FMC-SDP轉接器和評估板/Xilinx KC705參考設計
- 使用Xilinx FPGA實現OFDM系統 850次閱讀
- 系統演示平臺簡化了從評估到原型設計的過渡 646次閱讀
- Xilinx FPGA的FMC介紹 5643次閱讀
- dfrobot可插拔傳感器轉接器簡介 1043次閱讀
- dfrobotWiiChuck轉接器簡介 1104次閱讀
- 飛凌嵌入式JTAG轉接板?介紹 1614次閱讀
- digilent FMC Pcam適配器介紹 2731次閱讀
- digilent FMC-HDMI:雙HDMI輸入擴展子板介紹 4286次閱讀
- 天嵌科技LVDS轉接板-TTL-LVDS轉接板規格 3772次閱讀
- 2.5 GSPS高性能數模轉換器——AD9739A DAC 4675次閱讀
- 關于FPGA的FMC接口的詳細介紹 1.1w次閱讀
- 系統演示平臺便于快速進行原型制作與評估 1504次閱讀
- Maxim為三款Xilinx FPGA參考設計提供電源管理方案 1163次閱讀
- 非插入式器件如何測量? 1573次閱讀
- ADI實驗室電路:500V共模電壓電流監控器 2923次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多