電子發燒友App
創作
發文章
發帖 
提問 
發資料
發視頻資料介紹
Table of Contents
ezLINX? iCoupler? Isolated Interface Development Environment
The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower? digital isolator technology.
Quick Start Installation Setup Guide
The following guides give a complete step-by-step guide for the initial setup of the ezLINX board, including software installation for the ezLINX application, driver installation and setting the IP address. Before starting the setup guide, check that you have all of the necessary items from the following list to complete the setup process:
Evaluation Kit Contents
EZLINX-IIIDE-EBZ Evaluation board
USB A to mini USB B Cable
Power supply
ezLINX Software DVD
Installation Instructions
Select the operating system you are using from the list:
Windows XP Quick Start installation
Windows Vista 32-bit/64-bit Quick Start Installation
Windows 7 32-bit/64-bit Quick Start Installation
Hardware
The Hardware of the ezLINX iCoupler isolated interface development environment contains the ADSP-BF548 blackfin processor with 64MB of RAM and 32MB of Flash memory. The Isolated Physical layer communication standards are implemented using ADI's isolated transceivers with integrated iCoupler and isoPower technology. Routing between the various communication standards is implemented at the hardware level. Included are the following:
- Isolated USB using the ADuM3160
- Isolated CAN using the ADM3053 Signal and Power Isolated CAN transceiver
- Isolated RS-485/RS-422 using the ADM2587E Signal and Power Isolated RS-485/RS-422 transceiver
- Isolated RS-232 using the ADM3252E Signal and Power Isolated RS-232 transceiver
The ezLINX? Development Platform also includes the following:
- Hirose FX8 120P-SV(91) Extender Connector for daughter board connections.
A full list of jumper configurations for the ezLINX hardware can be found here.
Software
Sample PC Application Software
The ADSP-BF548 Blackfin processor is running open source uCLinux kernel and sample application. The sample PC Application integrates with the ezLINX hardware platform via isolated USB, allowing for a complete plug and play evaluation and development experience with 8 isolated communication standards.
Sample PC Application Software User guide
The sample PC Application is available for
- Windows XP
- Windows Vista
- Windows 7
Kernel Update Guide
The ezLINX board allows for the embedded kernel of the Blackfin? Processor to be updated with the latest version of the kernel image file. This will improve the functionality and reliability of the board.
For the step-by-step kernel update guide and the latest image file, follow the link below:
Kernel Restore Guide
If the kernel image file becomes corrupted then the ezLINX board cannot be connected to the PC application. In this case the factory reset feature can't be used and in order to re-establish the connection the kernel must be restored from the back-up location in the ezLINX board's flash memory. This process can also be used to revert the embedded software on the ezLINX board back to its original version.
For the step-by-step kernel restore guide, follow the link below:
Troubleshooting
Software License
- MCGS 嵌入版用戶指南 0次下載
- EVAL-AD5940評估套件用戶指南 9次下載
- ezLINX USB漂流器
- ezLINX?示例PC應用程序源代碼
- EzLINX?印制板制造文件
- ezLINX?示例PC應用程序安裝
- ezLINX? Sample PC Application Install
- MPLAB? XC16的詳細用戶指南
- MCP9600基礎知識及評估板用戶指南
- PSMC設計器用戶指南及技巧
- MTCH112基礎知識及用戶指南
- MCP3903評估板用戶指南
- Microchip 調試器（MDB） 用戶指南
- TMS320C28X處理器匯編語言工具用戶指南 30次下載
- SEED-BLDC用戶指南(for2812) 20次下載
- CD100M滿杯檢測方案的安裝指南 240次閱讀
- Air780EP模塊AT開發-HTTP應用指南 319次閱讀
- 電工必備接線指南：輕松掌握各種電路接線技巧 805次閱讀
- 汽車網絡安全-挑戰和實踐指南 409次閱讀
- OpenCV4.8+CUDA+擴展模塊支持編譯指南 713次閱讀
- 濾波器設計指南 2097次閱讀
- MSPM0開發應用指南合集 2190次閱讀
- 泰凌微電子App使用指南——TelinkApps介紹 4164次閱讀
- AEM科技SolidMatrix? 和 AirMatrix? 保險絲產品選型指南 946次閱讀
- 為什么電子指南針能指示方向 1629次閱讀
- 使用含快速開關SiC器件的RC緩沖電路實用解決方案和指南 2531次閱讀
- PCB設計之五個EMI設計指南 3397次閱讀
- firefly AIO-3288J主板使用指南 1510次閱讀
- Linux用戶與用戶組的關系詳解 6994次閱讀
- iPhone自帶的指南針的妙用 7562次閱讀
上傳資料賺積分下載排行
本周
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 2雷達的基本分類方法
- 1.25 MB | 4次下載 | 4 積分
- 3電感技術講解
- 827.73 KB | 2次下載 | 免費
- 4從 MSP430? MCU 到 MSPM0 MCU 的遷移指南
- 1.17MB | 2次下載 | 免費
- 5有源低通濾波器設計應用說明
- 1.12MB | 2次下載 | 免費
- 6RA-Eco-RA2E1-48PIN-V1.0開發板資料
- 35.59 MB | 2次下載 | 免費
- 7面向熱插拔應用的 I2C 解決方案
- 685.57KB | 1次下載 | 免費
- 8愛普生有源晶體振蕩器SG3225EEN應用于儲能NPC、新能源
- 317.46 KB | 1次下載 | 免費
本月
- 12024年工控與通信行業上游發展趨勢和熱點解讀
- 2.61 MB | 763次下載 | 免費
- 2HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 3繼電保護原理
- 2.80 MB | 36次下載 | 免費
- 4正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 32次下載 | 1 積分
- 5labview實現DBC在界面加載配置
- 0.57 MB | 21次下載 | 5 積分
- 6在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 7GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 14次下載 | 免費
- 8AD18學習筆記
- 14.47 MB | 8次下載 | 2 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
工商網監
評論